Info needed: Technical Assistance: M38A1-CND3

[maple_leaf_eh]

Originally Posted by RichCam

...
According to my friend, the fuel tank was replaced because it had rusted and contaminated the fuel.
...

There are two styles of M38A1 CDN fuel tank. (Rob taught me this.) The two earlier contracts have sheet metal stamped tanks. The CDN3 has a much more robust welded flat plate tank. All will deteriorate! On my CDN3 the issue is the tank got punky and has been fibreglassed in place, hopefully to stop the rusting. However, the resin has stuck it into place, which makes it hard to remove.

[rob love]

Originally Posted by maple_leaf_eh

There are two styles of M38A1 CDN fuel tank. (Rob taught me this.) The two earlier contracts have sheet metal stamped tanks. The CDN3 has a much more robust welded flat plate tank. All will deteriorate! On my CDN3 the issue is the tank got punky and has been fibreglassed in place, hopefully to stop the rusting. However, the resin has stuck it into place, which makes it hard to remove.

The flat metal, welded seam tanks are the replacement tanks. Made in Canada, they had filler necks that didn't accept the original gas caps very well. Underneath the tanks, in that deep well, was the perfect dirt and moisture trap. The tanks generally rusted from underneath. Reminds me that I need to remove mine, slean out the mudwell, and paint the well and bottom of the tank with something like tremclad or POR-15.

[RichCam]

Guys,

4 very dirty and soiled plugs came out of the cylinder head. Followed the procedure for removing the waterproof caps and I didn't have to remove the spark plug wires from the distributor cap. I re-installed after cleaning, squirted some gas into the air intake and it started, ran for about 3 seconds and quit. I repeated this about 4 times and each time it fired up, ran and quit. I suspect there is now an issue at the fuel bowl. So, does anyone have .pdf file or link for an exploded view of the Carter YS950S carburetor? Please post or PM when you have a moment. (Fuel pump is good, I have fuel up to the carburetor, fuel intake screen is clean)
Cheers, Richard.

[Wayne Hingley]

Hi Richard,
PM me with your email address and Ill send you a PDF of the Carter YS manual. The file size is too large to post here.

[RichCam]

Thanks Wayne, PM sent.

I will check out some of the other M38A threads as well.