![]() |
|
#1
|
||||
|
||||
![]()
There is a product here in Canada called "Hold Tight" You mix it in with your pressure washer water when you rinse the bare metal and it will provide a minimum of 72 hours protection from flash rusting, in practice it is usually twice that. I have used it when I "wet" blast with my sandblaster...it is pretty pricey here but well worth the price in my opinion.
John |
#2
|
||||
|
||||
![]()
Mind I am surprised the solution was still active after three years, usually its kaput after around six months depending on conditions.. (my findings anyway)
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#3
|
||||
|
||||
![]()
I also find it evaporates, so you have to keep adding both water and molasses to keep it going, probably what Kevin was doing
|
#4
|
||||
|
||||
![]()
Either way, it's done well !
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
![]() |
Thread Tools | |
Display Modes | |
|
|