Lynx II, hull # 4225

[Peter Duggan]

James,

Thanks for the prompt reply. Even by MLU standards, the time between question and answer must be a record.

Peter

[Peter Duggan]

Guys,

The carburetor on my Lynx 11 is a Ford 21-29, which is reverse mounted compared to conventional engined CMPs. My original choke linkage was missing and my current setup is reversed to what it should be. Works, but the cab control knob is pulled out when it should be flush and vice versa. I do have the second original piece of the choke linkage.
Would anyone out there have a good picture of the piece that I have identified with the yellow arrow. and would be willing to make a tracing of it ?

Thanks, Peter

2017-05-16 09.34.11_LI.jpg 2017-05-16 09.35.21.jpg

[Mike Cecil]

Peter

You could get this one from Macs and adapt/modify it, or use it as the template.

Mike

http://www.macsautoparts.com/early_v...00-375768.html

[Lynn Eades]

A business called Vintage speed does Holley parts. Charlie Price is the man. He will have the bit you want to operate with a cable, or a rod (ball end)
Good to deal with. He lists on ebay, but you are better to go direct to his web site.

[Mike Cecil]

Nice site, Lynn: thanks for that.

Peter,

The exact part you need is even pictured on the reproduction 94 carbie on Vintage Speed's website, so he must have them reproduced and hopefully have them available.

Mike

[Lynn Eades]

Mike, the one thing I couldn't find is the ball ended throttle lever.
There is a modern needle and seat, which should help things, along with a .005" o/s. throttle spindle.

[Mike Cecil]

This one?

http://www.macsautoparts.com/early_v...hp-375782.html

Mike