VICKERS MK6B's resto

[Alex van de Wetering]

Have a look at the "Matilda Diaries

Brad, thanks for posting that link....great to follow the restoration of the Matilda!

The lettering on the steel beams you see in the video is a modern day equivalant of the punched numbers and is either done by laser printing, or by inkjet printing like in this case. It's not so much intended to mark certain parts, but more aimed to easily identify the type and measurement of the profiles, as well as the makers name. You also see bar codes these days containing info on material properties etc.

Alex

[Richard Farrant]

Originally Posted by Alex van de Wetering

Brad, thanks for posting that link....great to follow the restoration of the Matilda!

The lettering on the steel beams you see in the video is a modern day equivalant of the punched numbers and is either done by laser printing, or by inkjet printing like in this case. It's not so much intended to mark certain parts, but more aimed to easily identify the type and measurement of the profiles, as well as the makers name. You also see bar codes these days containing info on material properties etc.

Alex

The modern word is 'traceability' so that any issues, the batch can be identified. With structural steel work now, this is required.

[colin jones]

Hello all, I haven't posted for a while as I've ben away and quite busy, I have spent some time on the trans and I was at first quite concerned wether I could save it or not as all the bottom of the box is simply gone.
I am however, very fortunate that the oxidization has been localized to the bottom only. My first impression was that it was not salvageable but I am more confident that I can either repair the original box or I will attempt to fabricate a new one from steel. The gears are not damaged at all and even the bearings age in remarkable condition. It will be a slowish process but I feel very confident that I can make one. I would use the original top as it is still good.

[colin jones]

I got quite exited today as I have been tapping, spraying, tapping, spraying this part for about a month now and I must admit I never thought it would move but today it did. It was so solid with years of gunk and rust but consistency has paid off as I only have one of these and I need two. I am a very happy vegemite. The engine will be someone else's challenge.