|
|
|
|
#1
22-12-16, 20:03
|
||||
|
||||
Final colour tool boxes and jerrycan holders
Back in the truck hangar and out of the aircraft hangars for a while.
Feels nice to be reunited with my CMP trucks . Life is not the same without them. Today , gave the tool boxes and jerrycan holders a final coat of OD colour.
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis Last edited by Robert Bergeron; 10-10-20 at 04:52. 
|
|
#2
23-12-16, 00:14
|
||||
|
||||
|
Wireless table dimensions and measurements for 2K1 Wireless 5 CMP C-15 truck
Friends,
Here are a few pictures my friend David Good ( AKA ) Super Dave was nice enough to send me. They focus on the wireless table . He also sent dimensions. They were taken in Reg Hodgson 's truck in Edmonton . I will start the fabrication of the table soon.
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis Last edited by Robert Bergeron; 23-12-16 at 01:26.
|
|
#3
23-12-16, 00:17
|
||||
|
||||
|
dimensions
Here are the dimensions / measurements for the table.
Thank you very much David !
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis
|
|
#4
23-12-16, 00:30
|
||||
|
||||
|
More measurements
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis
|
|
#5
23-12-16, 08:47
|
||||
|
||||
|
Looking good on your beautiful resto, I actually saw that picture of Bergen Op Zoom after I visited there a few years ago, actually stood in that square!!
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481 Last edited by lssah2025; 23-12-16 at 11:19.
|
|
#6
24-12-16, 01:19
|
||||
|
||||
|
paint job
Thank you for your good words Lance.
It would be nice if i could make it to Holland with the truck. Today i ordered the angled steel and tubes to start the fabrication of the wireless table . I painted the inside of the tool boxes and the jerrycan holders OD Green. Inside this toolbox i will store my portable CMP toolbox with all the specific CMP tools and the trouble lamp. A gallon of coolant fluid would be handy also. Also painted the diamond shaped steel grills for the generator compartment. Inside the box i installed a temporary equipment rack on the rear wall. Looking for the plans or sketch and measurements for the original. In said rack we see some of the equipment that would be carried : Rolls of field telephone wire for the phones and radio remote. Extension cable for the wireless set headset and a satchel with extra headsets , guy ropes for the vertical antennae . A first aid kit and a canvas cover for the wireless set when taken outside the box.The leather bag is canadian specific and is for the vertical antennae accessories.Some instruction books on the wireless set and remote unit. A piece of hemp rope for the penthouse tent .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis Last edited by Robert Bergeron; 24-12-16 at 02:00.
|
|
#7
24-12-16, 01:27
|
||||
|
||||
|
more work
Other toolbox painted OD on the inside.
Inside this toolbox will be stored a few 1 Gal oil cans and the chains you see mounted on the rear tires. An hydraulic jack with wooden support board should also nicely fit in here and be quite usefull in the event of a flat tire.
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis Last edited by Robert Bergeron; 24-12-16 at 02:01.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sold: 1944 Chev C15A Wire-3 | Don Dingwall | For Sale Or Wanted | 11 | 02-04-15 23:26 |
| 1944 A27M Cromwell MK IV Restoration | lssah2025 | The Armour Forum | 36 | 07-05-14 22:50 |
| What was once 2, is now 1. (C15A-Wire-5) | RichCam | The Softskin Forum | 3 | 30-12-11 22:49 |
| CMP toolbox wire | Keith Webb | For Sale Or Wanted | 0 | 21-08-07 12:04 |
Hybrid Mode
