|
|
|
|
#1
07-11-16, 01:09
|
|||
|
|||
wanted 42 WLC head
If you go to a #6 head it will be a bugger to start and have a short engine life. Copper gaskets can be hard to get a good seal .
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank 
|
|
#2
07-11-16, 01:33
|
||||
|
||||
|
Head wlc
Ia place called nothing but fun motorcycle has heads .I have dealt with them fast service
|
|
#3
10-11-16, 15:14
|
|||
|
|||
|
George,
Beware of the reproduction heads - I understand those made in Europe are ok but the Indian parts look good but are porous & laminated castings. I have an extra OEM 5 rear head that has been milled .060 to clean it up. PM if you are interested. I was told by experienced HD mechanics that the aluminum heads used the asbestos fibre gaskets & the iron heads used the copper gaskets. It seems it is a heat transfer situation. I used NOS fibre gaskets with good success. Jack
|
|
#4
10-11-16, 19:59
|
|||
|
|||
|
wanted head wlc
I'll check with my mechanic The copper gaskets won't crush down as much as the asbestos ones so it might match my front new head as it is not milled if I use a copper gasket at the back and a asbestos gasket at the front . It is easier to get a good seal with the asbestos gasket than the copper ,
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Button head bolts ??? 3/8 and 5/16 | RichardT10829 | The Carrier Forum | 6 | 04-12-15 17:00 |
| Wanted: oilfilter head bolts | Svenn Ryen | For Sale Or Wanted | 0 | 16-01-13 00:02 |
| No. 19 Set Head Set Bracket | David Dunlop | For Sale Or Wanted | 0 | 24-04-08 16:59 |
| Jif, the head honcho | Keith Webb | The Sergeants' Mess | 7 | 30-04-05 02:14 |
| My head hurts | chris vickery | Military Shows & Events | 1 | 11-08-03 02:56 |
Hybrid Mode
