![]() |
|
|
|
#1
|
|||
|
|||
|
Making someone sell those because of a municipal 'eyesore' bylaw is obscene. There was a similar instance here where an old guy had a collection of antique farm tractors. All well painted, maintained, almost invisible from the road and carefully trimmed grass around and under them. The old guy dies and before he's in the ground his widow is told to get rid of them or face a fine. She did. A great deal of history and her husband's investment were gone. How dare they.
|
|
#2
|
|||
|
|||
|
Thanks for posting the photos Rob.
Just home about a half hour ago and am pretty zonked. Hopefully I can sleep in a little tomorrow, then unloading can begin. Not sure when I'll be heading back to Ottawa for the second one. |
|
#3
|
|||
|
|||
|
Rob
I talked to Ross last night, it sounds like you had some full days and lots of help. Aren't you glad that the Ontario collectors are so helpful and there none of the difficulties that removing things from the West creates. Glad to see they went to a good home and help expand your collection. I'll be out to see them some time in the future. Gord |
|
#4
|
|||
|
|||
|
Quote:
As I have mentioned, without Bob and crew showing up, I would have been doing a lot of hand winching. At best I would have had the close one on the trailer and to Bob's for Tuesday evening, and then spent Wednesday hand winching the second one up the hill. I would have ended up backing the trailer onto the grass to pick it up once to the top of the hill, but even so, the first leg of the winching had to have been at least 70 feet, and all of it uphill. I can promise you this: after seeing Bob's winch set-up, I'll be setting up similar on my trailer. I actually picked up an old Warn 8000 pound winch for the trailer last fall which has been kicking around the shop ever since. It will be on the trailer soon enough, hopefully for the trip back to Ottawa. I think Bob mentioned some poaching from Saskatchewan. Perhaps I may be able to help out on that one, but I'll have to work out the details. |
|
#5
|
||||
|
||||
|
Quote:
Let us know if you have any instructions on how you want the gun stored. Right now it is hidden from view by a HUP or two in the back field. Enjoy your kip!
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? |
|
#6
|
|||
|
|||
|
Perhaps one extra item that could be covered is that big gash on the plate over the spades. Winter is coming and I would hate that it would fill with water and then split the frame. Or is that just a Manitoba thing??
I am already searching the internet for some parts sources. Last edited by rob love; 09-09-16 at 07:03. |
|
#7
|
||||
|
||||
|
If you want to share in the experience of recovering a 25 Pounder, see the video at the following link: https://youtu.be/5m5_uRLBSDU
Some observations: Rob L is a lucky man - first, his wife permits him to play hooky for a week, next he finds two guns and buys them before the rush of bidders, then both of the guns had wheels that turned (although one set of wheels had to be replaced - the nuts actually came off without a struggle), and the rain held off until the guns were loaded. Rob was assisted by fellow restorers from Ontario, who came along not only for the experience, but to help a guy who is well-known to help others in the hobby. The video only shows the winch pulls and not all of the hard labour that went into keeping the lawn pristine, and the gun rolling. The slope in the video looks gentle, but it was fairly steep. Things went well, but it took some effort to move the guns safely. A look at Rob's shirt says it all. It was a hot and humid recovery, but very a satisfying day.
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? Last edited by RHClarke; 21-08-16 at 22:19. |
|
#8
|
|||
|
|||
|
Well a little update. I have been trying to get that recoil mechanism back up on the gun to where it should be. Had two chain hoists tight enough that you could pluck the chains like a guitar, and no movement. Added some heat in certain spots and still no movement, even with the sledge and a block of oak trying to assist. I kept spraying it down with penetrating oil every time I went by it.
Managed to chain up a 5 ton jack to the back of the breech, and pumped to as hard as it goes. No luck. Brought out the medium artillery this weekend. A Enerpac portapower with 10 ton (20,000 pound) cylinder with chain attachments. Wrapped a 7/16 chain through the trunnions and attached the cylinder to the back of the breech. Pumped her up, and suddenly it seemed like movement. Alas, it was a link on the 7/16 chain that had failed. Set it all up again and still no luck. So yesterday I headed out to my favorite scrapyard to pick up a spare in case I have to torch off the cradle. This one is a little worse for wear, but I think it will clean up OK. House renovations continue in earnest, so gun time is limited. Last edited by rob love; 06-09-16 at 16:14. |
|
#9
|
|||
|
|||
|
Great recovery and road trip. Some of us would have paid just to be along for the fun and Hammond Barn stop...
House renovations always seem to pop up when there are more interesting things to do, but most of us know which is the more important and where the support for our hobbies comes from Unless you're single, a tolerant partner goes a long way. Mine is pretty good about all of it, but has told my friends that she wants to go first, so she doesn't have to deal with my stuff...
|
|
#10
|
|||
|
|||
|
Quote:
__________________
Terry Warner - 74-????? M151A2 - 70-08876 M38A1 - 53-71233 M100CDN trailer Beware! The Green Disease walks among us! |
|
#11
|
||||
|
||||
|
Amazing story !
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
![]() |
| Thread Tools | |
| Display Modes | |
|
|