Mk1* carrier rear number plate and lamp.

[eddy8men]

come on kev, the boys are waiting

[kevin powles]

The holes are 5/16" the inside radius of the lamp holder if not far away from a standard mastic tube at 49mm, the raised lamp holder is 2 1/16" wide, takes the standard CMP lamp holder.

[kevin powles]

Can only post one pic at a time grrr

[kevin powles]

Another pic

[kevin powles]

Mastic tube almost same as radius

[kevin powles]

More pics zzz

[kevin powles]

This is a midwest one

[kevin powles]

Originally Posted by eddy8men

come on kev, the boys are waiting

Rick, you must learn to be patient in this hobby, I know that more than most ��

[RichardT10829]

Cheers Kevin.

Excellent repro by John Bizal too !

[Michael R.]

Thanks Kevin.
For taking the time and effort to do the work you did for the number plate base.

[Lynn Eades]

Yes, I agree. Good effort Kevin!

The way I established the shape around the light was to find centre. Draw the hole and the O.D.,drawing it with a compass.(top 180 degrees)
With the compass still set the same, on a line through the horizontal centre, blend the missing bits (quadrants)each side...... Underkistumble?

Kevin your measurements confirm that the earlier plate with two lights fitted was otherwise the same size,

[RichardT10829]

Kev whilst I am cutting mine out, would you like me to cut you one out too ?

[eddy8men]

rich are you getting them done at a profilers or fabricating them yourself. if doing it at a profiler i'll get a mate to draw it on cad and send the file out to anyone who wants it

[kevin powles]

Hi rich, yes please, I have the pol holder to go on the mortar carrier but have seen wartime pics with the number plate removed and bolted to the pioneer tool plate, so I'm planning to do this on mine.

Kevin.