No 22 Wireless Set?

[ajmac]

Could someone tell me about the No22 set please. I know a reasonable amount about the No19 set, but see reference to a No22 set on some carrier stowage diagrams. What is a No22 and what is the difference between a No22 and a No19. Is the No22 portable?

Many Thanks,

[Tim Bell]

Originally Posted by ajmac

Could someone tell me about the No22 set please. I know a reasonable amount about the No19 set, but see reference to a No22 set on some carrier stowage diagrams. What is a No22 and what is the difference between a No22 and a No19. Is the No22 portable?

Many Thanks,

Best take a look at the Wireless for the Warrior website.

However, simple terms, the WS19 is vehicle mounted, or can be demounted on a board, but is not designed to be portable any great distance. The setup comprises Power Supply, Transmitter/Receiver, Aerial Tuner and Headset junction (control) box.

The WS22, can however be man-packed, the Transmitter/received carried with similar strap assembly to the WS18 has an integral aerial tuner would be carried by one man, with another man following along with the Power Supply Unit and the batteries... both connected together with a power lead... a further man is required to operate the set... and not something I'd relish having to carry too far!

Hope this helps

Tim

[David Dunlop]

This is the basic set.


David

[David Dunlop]

While I think of it. Take a look at the upper Operators Lamp in this photo. It has a black, half round hood on it. Anyone know a source of supply for that item, or provide more detailed information about it?

If any of you have tried using the lower style Operators Lamp in the dark, you will understand why that hood is a great idea. Even with the solid red lens in use, the lamp gets very annoying, very quickly.

David

[Chris Suslowicz]

...and this is the set with most of the ancillaries.

http://www.keithwatt.pwp.blueyonder....useum/ws22.htm

(Yes, Keith is still looking to collect the remaining bits!)

Chris

[Chris Suslowicz]

Originally Posted by David Dunlop

While I think of it. Take a look at the upper Operators Lamp in this photo. It has a black, half round hood on it. Anyone know a source of supply for that item, or provide more detailed information about it?

If any of you have tried using the lower style Operators Lamp in the dark, you will understand why that hood is a great idea. Even with the solid red lens in use, the lamp gets very annoying, very quickly.

David

The shade comes ready fitted to the WS22 and WS62 lamps, but for some reason the WS19 lamp was supplied without it. It should not be difficult to make shades up out of thin sheet brass or tinplate.

Chris.

[Mike K]

The WS22 was also manufactured here , although based on the British set , it was a totally new revised set specifically designed to cope with jungle -damp conditions.

The set utilized the then new PVC coated wires , special wax was used to seal the fragile RF coils . I have a recorded talk given by a chap who was in the army wireless research depot in Burwood, Melbourne. He said they immersed the set in a tank of water , blew the water off with compressed air , and turned it on, it worked ! The 122 set , the same set but with provision for XTAl control of the TX ... a very nice set to use . I had many QSO's with a 122 set on CW and AM .... one memorable evening I had three CW contacts into USA on the 40mx band .

Having owned the British set ... can I politely write , it's a piece of junk compared to the Aust. set . On standby rx, the Aust. set only requires a very small power , in terms of watts

The manual is here
http://tosty.id.au/122-Manual/

Mike

[Bruce Parker (RIP)]

I got this lamp from 'Johny Canuck' not so long ago. If you want construction details on the hood, just ask.

Originally Posted by David Dunlop

While I think of it. Take a look at the upper Operators Lamp in this photo. It has a black, half round hood on it. Anyone know a source of supply for that item, or provide more detailed information about it?

If any of you have tried using the lower style Operators Lamp in the dark, you will understand why that hood is a great idea. Even with the solid red lens in use, the lamp gets very annoying, very quickly.

David

[David Dunlop]

Hi Bruce.

Nice lamp. As a 22-set entity, the lamp must be ID'd somewhere in the ZA Numbering system as a complete assembly, as well as the individual parts thereof. The hood is so darned practical it would seem logical it could be ordered for use with the basic lamp, regardless of the wireless set.

Oh, wait a minute. That would imply logic exists in the military beaucracy.

David

[Chris Suslowicz]

Originally Posted by David Dunlop

Hi Bruce.

Nice lamp. As a 22-set entity, the lamp must be ID'd somewhere in the ZA Numbering system as a complete assembly, as well as the individual parts thereof. The hood is so darned practical it would seem logical it could be ordered for use with the basic lamp, regardless of the wireless set.

Oh, wait a minute. That would imply logic exists in the military beaucracy.

David

Well, I've just looked through the WS22 and WS62 parts lists and neither of them include the operator's lamp, which is something of a bugger. The Working Instructions for the WS62 shows the lamp with its metal shade and also the ultraviolet adapter, but does not give a component list.

It will exist, somewhere, and will have VAOS numbers for every single piece.

I may be able to find you a shade (or a spare WS62 lamp (,operator, No.6B)) somewhere.

Chris.

[David Dunlop]

That would be great, Chris. No rush for it.

Thanks, David