I have begun my carrier's transformation

[Jon Bradshaw]

Here are some war time pics of the little tanks being used. From what I read they were used in platoons with 2 mg tanks and 2 gun mounted tanks. Seems they were used a lot until they were destroyed.
Color on these pics is pretty vibrant, any opinion on how good the paint color match is?

[Jon Bradshaw]

Here are the pics of my tank, it has been painted since these were taken but only primer grey. Turret spins easily and seems well balanced. Will make a gun in the next year. I have had it out driving a few times and seem to have adjusted all the steering and braking brakes so it handles well. A bit scary on pavement as it likes to skid sideways on turns. Driving the chassis in reverse does not seem to hurt the steering system. It does seem more responsive in reverse but only slightly.

[eddy8men]

that's a really nice job. going to look great when it's finished

[Petr Brezina]

Great progress, very nice!

[Hanno Spoelstra]

Jon,

Great work on the replica!

Some pictures of the sole remaining "Dutchman" for your reference.

HTH,
Hanno

P1160217_resized.jpg P1160227_resized.jpg P1160238_resized.jpg P1160252_resized.jpg P1160266_resized.jpg

[Jon Bradshaw]

As you guys can see, the biggest discrepancy is the rear end, I left part of the front glacis of the carrier with the tow eyes for practical purposes. Taking that much out of the carrier to make it shorter seemed excessive and securing it for transport is much easier with those to chain to.

The pic Hanno put up of the view port is my next big hurdle. I need to make those from scratch, unless someone has a spare they might part with? Once I have one I can copy them, fairly closely.... Otherwise I will just use the pic and make something similar looking. Much as I have done thus far.

Thanks for the encouragement.

[Jon Bradshaw]

So after reading and trying a few things on how to resize photos I have finally got this sorted. I will post a series of photos showing how I have assembled this to this point. The track jack I made from a modified M113 track jack, it works well, especially with a cordless impact on it.

[maple_leaf_eh]

Originally Posted by Jon Bradshaw

...

The pic Hanno put up of the view port is my next big hurdle. I need to make those from scratch, unless someone has a spare they might part with? Once I have one I can copy them, fairly closely.... Otherwise I will just use the pic and make something similar looking. Much as I have done thus far.

Thanks for the encouragement.

There is a shop in central US that has made a replica Panzer III, initially with five roadwheels then they replaced them with six roadwheels. I saw their work on a FaceBook group, Panzer Fabrik or something close.

Their techniques for fabricating realistic looking thick armour are worth copying. As I recall, the plate is 1/4" mild steel and the visible edge of the supposedly thick plate is 1/4" bar stock welded one on top of another, and ground smooth. Their keystone finger joints on the frontal armour of the Panzer are very convincing.