Canadian 10cwt Trailer rebuild

[Colin Alford]

Jordan,

The box on the left front corner is a tool box (I don't know why it is so large considering the few tools that it should contain). On the right rear corner is a literature holder.

From the body description: "The trailer is equipped with a tool box and literature container bolted to the outside of the body. The normal location for the tool box is the left side front and the literature container right side rear. The sides of the body are interchangeable, therefore if this is done the positions of the tool box and literature container would be automatically reversed."

Does your trailer have any mounting holes to accommodate the tool box and literature container? If not then maybe this is another production change.

[Jordan Baker]

There might be some welded over holes. I haven't yet taken a super close look at the sides for any extra holes. Although i did notice what might be two filled in near where they would be according to these pictures.

[Luigi Divano]

Dear all,

due to the fact that I'm going to restore a 10cwt Canadian trailer missing of the two tool boxes, someone of you guys has the measures / detaied drawings in order to replicate these tool boxes?

Thanks in advance for your help and cooperation

Best Regards

Luigi

[Luigi Divano]

Sorry if I bother you again; I forgot to ask you if someone has for sale a reproduction / original Spare part list of the 10 cwt Canadian trailer with the detailed drawings for each part of the trailer

Thanks again for the cooperation

Best Regards

Luigi

[Brian Gough]

Hi Luigi

email sent

Brian

[Alex van de Wetering]

Jordan,

That's a really nice solid trailer you have there; well done! Please keep us updated on the progress.

Alex

[Jordan Baker]

I havent had much progress to report on for the past while. However with the arrival of spring/summer weather the past few days I have made progress. Ive got nearly every piece that can come off the trailer off and sandblasted. I will be rebuilding the brakes over the next week. One set of shoes had the pads looking really good but the other set the pads were crumbling and falling apart.

It is supposed to be really nice out again tomorrow so I plan to start painting some POR on many of the parts once I get home from the OMVA show.