carrier exhaust sources - North America

[super dave]

I went with a Walker muffler 17864 from NAPA as it was the best I could find that was close to the original one and had a length of 17" in the body and 1 1/2 inlet and outlet. I made the system I believe like the original setup. I also used J bends ( Dynomax 42320 ) for the tail pipe and the bends from the strait pipe to the mufflers as they are a Mandrel bent.

[Private_collector]

Jim,

This thread some time ago now, may help.
http://www.mapleleafup.net/forums/sh...t=Ford+muffler
I looked for the guy (in USA) that made my CMP muffler to order, but looks like he isn't on ebay any more. At least my original link to his sales is no longer taking me to his wares.

I'll keep looking.
dsc_0242-resized-960.jpg dsc_0240-resized-960.jpg dsc_0239-resized-960.jpg
The above photos are the muffler I had made to specs acquired from folks on MLU.
If I can track down the manufacturer, they can make to your exact requirements.