MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 11-05-15, 18:35
motto (RIP) motto (RIP) is offline
RIP
 
Join Date: Apr 2010
Location: Woodend,Victoria,Australia
Posts: 1,068
Default

Assuming the brake setup is similar in design to White Scout Car, Dodge WC and Jeep in having major and minor adjustments that would be a good starting place. The minor (upper) adjustment is a simple snail cam that merely restricts how far the shoe can move away from the drum. Rotate the adjuster in one direction and it will have a soft take up as the cam surface contacts the shoe, go the other way and it should come to a dead stop as the tail of the cam contacts the shoe. Move it just out of contact and it should be well clear and play no further part.
You could try hammering around the drum at this point with a sledge hammer and a block of wood. The ends of the shoes should be sitting against the wheel cylinder pistons and you will be trying to jar them into giving a little clearance.
If no good then loosen the lock nuts on the major (lower) adjusters. These are eccentrics and will drive the lower ends of the shoes in an arc. You should be able to rotate them until you find the loose point.
If none of this works then proceed as Lynn suggests and the shoes should come off with the drum.
Good luck.

David

Thinking some more on the matter Gina there may be an additional attachment point for the shoes to the backing plate that will interfere with their coming off with the drum if you attempt to do that. The attach points act as guides and take various forms depending on the vehicle.
__________________
Hell no! I'm not that old!

Last edited by motto (RIP); 12-05-15 at 06:59.
Reply With Quote
  #2  
Old 11-05-15, 23:53
Mrs Vampire Mrs Vampire is offline
[user name reset]
 
Join Date: Oct 2012
Posts: 392
Default

will try those suggestions today and get back to you.... Tanks
Reply With Quote
  #3  
Old 27-05-15, 20:08
motto (RIP) motto (RIP) is offline
RIP
 
Join Date: Apr 2010
Location: Woodend,Victoria,Australia
Posts: 1,068
Default What happened?

Your silence does not bode well Gina.

David
__________________
Hell no! I'm not that old!
Reply With Quote
  #4  
Old 28-05-15, 00:11
Mrs Vampire Mrs Vampire is offline
[user name reset]
 
Join Date: Oct 2012
Posts: 392
Default

Hi Motto

Got tied up with the electrics and the self resetting circuit breaker problems. after a major rewire I am asking myself "do I want to stick with those Klixon breakers or do I want to install a fuse board ?"

Wheels in a couple of weeks I think. Wont be happy until every thing electric works, is reliable and it safe....

The way it was wired it could easily have cooked off.

The white and its sisters used a circuit board which is still get-able....should I change ??
Reply With Quote
  #5  
Old 28-05-15, 00:56
Andrew's Avatar
Andrew Andrew is offline
that halftrack guy
 
Join Date: Sep 2009
Location: ontario
Posts: 200
Default

My halftrack came with those breakers, i didnt bother with them, I got an NOS glass type fuse holder of ebay. They are still on there at times, or just call Gary's http://www.halftracks.com/index.cfm

You can still buy those breakers though, but I have only seen them thru aviation suppliers, and expensive

andy
__________________
1943 White M2A1 Halftrack (converted from an M4A1)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: driver side front axle hub/brake drum for a GPW jeep elvis3006 For Sale Or Wanted 3 28-03-12 21:46
Brake drum tolerences Casey B Post-war Military Vehicles 4 10-09-11 14:42
brake drum thickness. kevin powles The Carrier Forum 5 15-08-11 00:56
Wanted: UC Brake Drum & Front Bogies ajmac For Sale Or Wanted 4 10-07-10 21:45
brake drum mike mckinley For Sale Or Wanted 2 18-11-08 17:00


All times are GMT +2. The time now is 13:49.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016