Snail's pace Blitz rebuild

[Ryan]

Bit of tinkering today. Bolted up some wheel carrier mounts. Bit of welding. Still looks like it did a year,or is that two years ago lol.

[Howard]

Good to see you taking a considered approach to your work, old son!

[Ryan]

Get stuffed lol

[Ryan]

Cannot find my answer in searches so here goes.
What are you guys using for insulation/absorbtion strips when reassembling the cab sections? And where do you buy them?
thank you.

[Ganmain Tony]

I would try Clarke Rubber Ryan. A lot of my Cab 13 has rubber stripping about an inch/inch1/2 wide as well as using webbing with a black tar as the adhesive.

The stripping is not thick, about as thick as the canvas webbing.

[Plushy]

http://www.macsautoparts.com/ford_me...ing+&x=19&y=15

I got my Oil Treated Cab webbing from MACs Auto Parts .

[hrpearce]

Ryan I used rubber strip purchased from rare spares. I cut the holes with wad punches.

[Ganmain Tony]

Originally Posted by Plushy

http://www.macsautoparts.com/ford_me...ing+&x=19&y=15

I got my Oil Treated Cab webbing from MACs Auto Parts .

Terrific find mate - I dips me lid

Exactly what Ryan is looking for...

I'm going to get a few roles myself.

[Phil Waterman]

Hi

I used Rubber Roof Membrane material both for the under floor and between nose and cab. Check with a commercial roofing contractor the type that does large flat roofs. Take photo what you are working on and generally they will give you enough scrap roofing to do 5 trucks. If you want the sticky stuff it is what they use at edges it is about 6" wide and comes in rolls. Again they gave me the end of roll.

Cheers Phil