MLU FORUM  

Go Back   MLU FORUM > GENERAL WW2 TOPICS > The Wireless Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-02-15, 22:45
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,600
Default

Chris. You have been doing some nice detective work. One quick question. The No. 5 Cover. Is that the big one intended for use with the large wooden carriers? If so, I had always wondered about the large hole to the rear of the PSU. It is fitted with a square of brown leather but the opening is still quite large for inclement weather. If the No. 23 Grommet of Roberta's fits that opening, that is a great discovery and something to keep an eye out for in the future.

David
Reply With Quote
  #2  
Old 04-02-15, 22:54
Chris Suslowicz Chris Suslowicz is offline
Junior Password Gnome
 
Join Date: May 2007
Location: England
Posts: 858
Default

That's the one, the sort of tent arrangement for Carrier, Set, No.3 (or 23).

Chris.
Reply With Quote
  #3  
Old 06-02-15, 02:55
universalgrl universalgrl is offline
Roberta
 
Join Date: Apr 2010
Location: Comox BC
Posts: 157
Default rubber grommet # 23

The rubber grommet # 23 is a perfect fit for the large opening in the # 5 cover. It's the correct size fit for the F rod. but I don't think it would fit the cable going out to the mast.
If you are lucky enough to have both pieces use a good rubber or O ring lubricant (not ky HA HA), the grommet was good but the cover piece was starting to crack.

Here's another question. I have the # 16 ZA 28542 and # 17 ZA 28543 control box for my 38 AFV installation, but I found another # 17 ZA 24891 box that is marked 510 not 38. Would that be for the CDN 510 set.

Both of the first 2 boxes are tropicalized which is a good thing on the west coast as it's currently coming down in biblical sized buckets right now.
Attached Images
File Type: jpg DSCF4168.jpg (78.2 KB, 9 views)
File Type: jpg DSCF4169.jpg (78.6 KB, 7 views)
File Type: jpg DSCF4172.jpg (66.2 KB, 10 views)
File Type: jpg DSCF4173.jpg (98.6 KB, 13 views)
__________________
Roberta Jayne Melville CD II QJ

MK I * universal carrier
1942 WLC Harley under restoration
1957 M38A1 jeep
R.E.L. optical equipment
Military manuals
Field phones
MK II 19 set (needs work)
4 MK III W-19 sets
AN/PRC-9
CPRC-26
WS-29 componets
WS-38 AFV
WS-38 MK III
WS-48 with generator
WS-58 MK I
MK V heliograph
Reply With Quote
  #4  
Old 06-02-15, 04:04
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,600
Default

Nice work, Roberta. That grommet looks right at home! Looks like I have to add another fiddly bit to my 19 Set Needs List. I always assumed it would get shorter over time. Good to know the correct way these things are supposed to go together.

David
Reply With Quote
  #5  
Old 06-02-15, 21:29
Chris Suslowicz Chris Suslowicz is offline
Junior Password Gnome
 
Join Date: May 2007
Location: England
Posts: 858
Default

Quote:
Originally Posted by universalgrl View Post
The rubber grommet # 23 is a perfect fit for the large opening in the # 5 cover. It's the correct size fit for the F rod. but I don't think it would fit the cable going out to the mast.
If you are lucky enough to have both pieces use a good rubber or O ring lubricant (not ky HA HA), the grommet was good but the cover piece was starting to crack.

Here's another question. I have the # 16 ZA 28542 and # 17 ZA 28543 control box for my 38 AFV installation, but I found another # 17 ZA 24891 box that is marked 510 not 38. Would that be for the CDN 510 set.

Both of the first 2 boxes are tropicalized which is a good thing on the west coast as it's currently coming down in biblical sized buckets right now.
Hmmm, I think you'd do better with a leather preservative if the gasket on the cover is starting to crack.

On the control unit front, ZA.24891 is Control Unit No.17 (The original "Mk.1" version and would have had fabric covered dropleads. ZA.28543 is the Mk.1/1 with rubber leads and tropic proofing, while ZA.38153 is the Mk.2 presumably with the WS38 or 88 / WS31 or SR B40 switch.)

The AFV control units (16, 17 and 33 (the last one being for command tanks with 2xWS19 and an AFV set)) were used with the WS38 AFV, WS88AFV, WS31AFV, CPRC-26, and I suspect your example is for the Australian A510. All those sets required an external audio amplifier, and the first three had a combined PSU and AF amplifier unit. I think the CPRC26 relied on dry batteries for power, and probably the A510 did as well. The WS31 had power units/LF amplifiers in both 12 and 24 volt versions, but the WS88 version was only produced in the 12 volt version.

Wireless for the Warrior Volume 2 is your friend for all this stuff.
Louis spent decades researching this stuff and I don't know what we'd do without them.

Chris.
Reply With Quote
  #6  
Old 06-02-15, 21:57
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,600
Default Roberta

You are going to have to go back to wherever you found that No. 23 Grommet and try and corner the market. There are probably a few of us could use one.

David
Reply With Quote
  #7  
Old 06-02-15, 23:45
universalgrl universalgrl is offline
Roberta
 
Join Date: Apr 2010
Location: Comox BC
Posts: 157
Default No. 23 grommet

Dave
I bought the grommet where else but epay, and it's the only one I have seen. If there is anyone out there who is good at rubber casting that may be the way to go.
I will check out industrial paints and plastics in town, I know they have casting and moulding kits.
__________________
Roberta Jayne Melville CD II QJ

MK I * universal carrier
1942 WLC Harley under restoration
1957 M38A1 jeep
R.E.L. optical equipment
Military manuals
Field phones
MK II 19 set (needs work)
4 MK III W-19 sets
AN/PRC-9
CPRC-26
WS-29 componets
WS-38 AFV
WS-38 MK III
WS-48 with generator
WS-58 MK I
MK V heliograph
Reply With Quote
  #8  
Old 07-02-15, 16:20
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,600
Default

Hey Roberta.

Can you post a profile photo of the grommet whenever you have a chance and advise what the country of eBay origin it came from? No rush. Whenever you have your feet up with a glass of fine wine and are looking for something to do...

David
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gasket clamp Dave Schindel The Carrier Forum 4 07-02-12 06:43
Gasket patterns Keith Webb The Restoration Forum 1 27-02-09 15:20
Carrier speedo cable and choke cable. kevin powles The Carrier Forum 1 15-11-08 03:18
Inner windshield gasket Chuck Anderson The Restoration Forum 0 23-10-08 21:59
Gasket question Jordan Baker The Restoration Forum 6 26-12-05 03:57


All times are GMT +2. The time now is 18:30.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016