|
|
|
|
#1
19-08-14, 02:00
|
|||
|
|||
Did you buy a bunch of security tokens...?
Nice work Bill.
If you have the time can you measure the distance between the front edge of the tank back to the base of the filler neck..... should be around 9.25 inches. Thanks Bob C
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
#2
19-08-14, 02:09
|
||||
|
||||
|
Will pass the request on to Dad.
|
|
#3
01-09-14, 00:21
|
||||
|
||||
|
Hello Bob, The measurement from the leading edge of the tank to the front part of the flange for the filler tube is 6 1/2 inches.
|
|
#4
02-09-14, 17:48
|
|||
|
|||
|
Thanks Bill
Not to worry you but have you tried fitting the tank in place...... must be a real tight fit for the fuel spout....? and will the strap for the tank fit???
Just finishing some pictures for posting on my tank dilemma..... Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#5
03-09-14, 01:31
|
||||
|
||||
|
Hello Bob, My father is the one doing the restoration about 240 miles away from me. I will pass on the information about fitting, and see if he has any issues.
|
|
#6
03-09-14, 05:30
|
|||
|
|||
|
Miss fits.....
I beleive the retaining strap will hit right over the forward spout.
Bob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#7
04-09-14, 16:04
|
||||
|
||||
|
Double checked the filler measurements and they are correct. The tanks were restored and not re-fabricated, so the measurement is from the original tank. The mounting brackets and the cab are not on the frame, so there will have to be some fitting done when re-assembly takes place.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
