shutter glass

[matilda IIA]

Hi Guys
I have original glass, you just need to pick it up.
Kind regards

[Darrin Wright]

I had Windscreens Obrien cut glass to suit my frames, AU$10 ea.
At that price I had 3 spares cut in case they do get shot....more likely kicked.

[Dale Jordan]

Thanks everyone for the info on the glass . Does anyone out there , have three knob plunger assý 687-12 for the shutters that I could buy or lend me one so as to get some made . Dale

[Dale Jordan]

O.k I've just about got the shutters sorted out thanks to some MLU Members . One more question I need to machine up the 687-4 collar link large this is the spacer that goes in between inner and outer plates is it a roller or just a fixed spacer also the I need the DIA when I measured the cut outs in the hull i noticed that one of the cut- outs in the armor plate , are not parallel looks like it is narrower then goes into the round part , It looks to me to be around 20mm in DIA to allow it to operate also I also think Lynn mentioned it is the same thickness as the plate . JUST FOUND IT IN THE SPARE PARTS BOOK , SHOULD HAVE LOOKED FIRST 5/8 X 33/64 DALE

[Lynn Eades]

Euan, can you check the thickness?
I believe the riveted carriers are 4.5mm
I think the LP2 takes 5.5mm, but will need someone to check it please.

[Arthur Morel]

Originally Posted by matilda IIA

Hi Guys
I have original glass, you just need to pick it up.
Kind regards

If you still have glass would you post to New Zealand