|
|
|
|
#1
11-11-13, 07:21
|
|||
|
|||
Thread is 1/8" BSP (eighth gas), but check first, in case I mis-lead you.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
#2
11-11-13, 23:45
|
|||
|
|||
|
Spot on Lynn . Threads are cleaned out , found one at my local shop, good price $8.40 . Four wheels primed today took longer then I thought , lots of hard to get to places . Ready for bearings and the green paint by the end of the week .. Dale
__________________
1944 GPW and Bantam trailer Last edited by Dale Jordan; 12-11-13 at 06:08.
|
|
#3
13-11-13, 06:12
|
|||
|
|||
|
The two threaded holes for the grease nipples on the center hub , one has a small hole at the end of the thread , the other has a bigger hole , which one is for the nipple and which one for the pressure value as I did not take notice when I pull them out . Dale
__________________
1944 GPW and Bantam trailer
|
|
#4
13-11-13, 13:03
|
|||
|
|||
|
Dale, the grease nipple is on the outside of the wheel. The breather valve is on the inside. A tiny bit of grease on the ball part of the grease nipple before you paint it, and you can easily wipe it clean after. The grease nipple sits a an easy access angle. in the hub, I didn't know the holes were different so cant help.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#5
13-11-13, 20:30
|
|||
|
|||
|
Hi Lynn the threads for the breather and nipple are on the outside of the hub one spoke apart , but when you look inside the hub , with bearing out , one un threaded hole is about 4mm the other about 8mm just wondering if the bigger one is for the grease and the smaller for air .. Dale
__________________
1944 GPW and Bantam trailer
|
|
#6
03-12-13, 20:39
|
|||
|
|||
|
Big day Yesterday , double bogies back on with new rubbered wheels , plus idlers as well . My Carrier will be packed up under cover for the next three months as work will be full on over the xmas holidays no more days off for me . Dale
  
__________________
1944 GPW and Bantam trailer Last edited by Dale Jordan; 03-12-13 at 20:47.
|
|
#7
19-12-13, 22:30
|
|||
|
|||
|
My wife and I just brought a new home today 2.7 acres just out of town . Best bit for me is a 12m x 7m shed , lots of room to play this is my first ever shed hat to wait 52 years to get one , better late then never . great Christmas present .. Dale
__________________
1944 GPW and Bantam trailer
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Vic rail 2225 | colin jones | The Carrier Forum | 109 | 13-07-13 15:15 |
| My GM engine number when was it build?? | 8threcce | The Restoration Forum | 7 | 09-01-12 08:39 |
| Iltis carb re-build kit | servicepub (RIP) | Post-war Military Vehicles | 2 | 15-05-11 22:33 |
| How To Build A 2/5 Sherman Tank | T.J. | The Armour Forum | 1 | 16-01-08 11:17 |
| Pssst... want to build a gun tractor? | Keith Webb | The Softskin Forum | 12 | 16-07-04 00:13 |
Hybrid Mode
