|
|
|
|
#1
30-06-13, 13:50
|
||||
|
||||
Just curious
Im going to have a look at the manual myself, but one observation Howard and I made today is the track width on the front axle is greater than the rear axle.
Anyone wish to comment?? Fuel tank finally top coated and on. Spring hangers now sitting correctly - directly up and down - wonder what that'll do to caster angle and the steering of the truck? Now that the rest of the front suspension is tight - we've just noticed the play in the king pins - they will have to be done. Anyone had to replace them?
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements. 
|
|
#3
02-07-13, 00:39
|
||||
|
||||
Tony you are doing a fantastic job. Well done and please post more photos as you go along.
__________________
Cheers Cliff Hutchings aka MrRoo S.I.R. "and on the 8th day he made trucks so that man, made on the 7th day, had shelter when woman threw him out for the night" MrRoo says "TRUCKS ROOLE"
|
|
#4
02-07-13, 02:36
|
|||
|
|||
|
Tony, on the fitting of your tyres; My understanding is that you will get a longer life from your tyres, if you swap the two front wheels around, so that the leading part of the cleat (outsides of tyre) hit the ground first.
The way you have then now, is for a "driving" wheel as opposed to a "driven" wheel. How the front tyres of a 4x4 or 6x4, were fitted depended on the expected use. ie.the percentage of road use as opposed to 4 wheel, or 6 wheel drive use. She looks great!
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#5
02-07-13, 02:57
|
||||
|
||||
|
Thanks
To Rob and Cliff - really appreciate the encouragement...
 Lynn - I just didnt want every other person in the land reminding me that my front tyres are on the wrong way if I turn them around everywhere I take the truck  What do you know about the track difference? front vs rear axle?
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
|
|
#6
02-07-13, 03:39
|
|||
|
|||
|
Sorry Tony, just trying to help. Truth be known, in military service she was probably only ever fitted with road running treads on the front.
I don't know anything about the track difference.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#7
02-07-13, 04:27
|
||||
|
||||
|
Totally OK
Dont get me wrong Lynn, appreciate any and all comments and advice. What I know about these trucks is very limited and I am always learning.
I was cracking a cynical joke  you know...the tyre kickers at events that would point out the directional arrow facing the wrong way. I have seen the tyres in reverse even in old pictures. I think you are spot on in your assessment. It depended on wether the truck was predominantly on bitumen or dirt work that determined which direction the tread was facing. It would make for better tread wear if I was to reverse them..
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
