|
|
#10
13-02-12, 17:09
|
|||
|
|||
Solution is adapter plate 235 or 261
Hi
The solution for difference in location of water pump on later 235 and 261s is an adapter plate.   more on the adapter plate see http://canadianmilitarypattern.com/2...ifications.htm cost of the plate is small compared to the time to make one. Here is the guy I purchased my two plates from pre68bowtie@hotmail.com . The time consuming part is finding the correct water pump with the short shaft and the correct size pulley. Short shaft is necessary for clearance to the radiator and the correct pulley size is to keep the fan speeds reasonable, should be the same as the engine RPM. Hope this helps. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode