|
|
|
|
#1
05-02-12, 07:43
|
||||
|
||||
I won't bore you with lots of pics so here's a few.
|
|
#2
05-02-12, 07:50
|
||||
|
||||
|
The last couple of pics in the previous is the original hydraulic pump but I found it was knackered, so I decided to pull it apart and get the centre shaft out and modify it to take a standard piston pump. I needed to use the original shaft because of the spline.
|
|
#3
05-02-12, 07:55
|
||||
|
||||
|
I made up an adapter for a soft start coupling, but made a stronger engine half.
|
|
#4
05-02-12, 07:58
|
||||
|
||||
|
All fitted very well and I just need a couple of hydraulic fittings that I don't have, and It's a go'er.
Last edited by colin jones; 05-02-12 at 07:59. Reason: spelling error
|
|
#6
05-02-12, 10:10
|
||||
|
||||
|
Hi Easo, very simple. The spool valve directs the flow to the hydraulic motor and depending which way you push the control lever it will go in forward or reverse. I will be making it into a rocker foot control, much like a ride on mower.
Colin.
|
|
#7
12-02-12, 10:23
|
||||
|
||||
|
Hi all, here's a bit of an update
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
