|
|
|
|
#1
29-09-11, 18:06
|
||||
|
||||
Kevin Powles is busy making a load of down pipes perhaps give him a message he may have the answer ?
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). 
|
|
#2
29-09-11, 18:10
|
|||
|
|||
|
Quote:
|
|
#3
30-09-11, 01:59
|
|||
|
|||
|
muffler
When I redid my carrier I bought mufflers for the Pontiac Firefly car from Canadian Tire -they fit well and do the job at modest cost -I made a jig from an original pipe that goes from manifold to floor elbow (its rather heavy)-using the jig I had a new pipe made up and tack welded the flange to it-I then installed it pulling the flange up to a proper fit to the manifold-then I took it out again and welded the flange solid -Greg
|
|
#4
02-10-11, 18:42
|
|||
|
|||
|
If anyone wanted to know I found out that the Original muffler body length is 17" and the offset looking from one end of the muffler like a clock is 12:00 and 9:00.
|
|
#5
02-10-11, 20:31
|
||||
|
||||
|
mufflers
Hi, You will find a uk supplied Bosal Citron Saxo exhaust muffler is exact for a carrier in every way. I am making at the moment 6 sets of those down pipes, I have an original down pipe richard lent me but was missing the rounded ball end which I have a jenny to make it, will post some pics up when there finished.
kevin
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985.
|
|
#6
03-10-11, 04:47
|
|||
|
|||
|
Thanks, The pictures would be great. Your exhaust system turned out very nice, are your inlet and outlet 90 or 180 degrease apart ??
|
|
#7
29-06-14, 18:35
|
||||
|
||||
|
Quote:
Could you please provide basic dimensions and a part no. so I can check if these are a good fit for my Ford truck as well? Thanks in advance! Hanno
__________________
Regards, Hanno --------------------------
|
|
#8
29-06-14, 19:48
|
||||
|
||||
|
Point to note the bosal one is the only one that fits from the saxo, the rest are oval cans.... They are te exact same size length as a carrier can, and the diameter is the same too.
I am busy making mine, images etc on my thread, I make the top loops and bottoms out of stainless steel.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
