Handbrake replacement

[Little Jo]

Originally Posted by gary_bath_jr

Here's a crazy idea, not sure if it will work as I do not have the parts to test, however, is it possible to insert the short end of the U up ffrom the bottom of the hole and then rotate the bolt and push it up from the bottom? Of course this will only work if the hole is not threaded and you have to put a nut on it once in place.

Gary

Hi Gary

Mate, I tried everything even your idea, but to no avail as there are 3 holes the bolt passes through and I must admit cutting the small hole in the floor worked a treat, too easy.

Little Jo
Tony Van Rhoda