WTB - Bren mount for a MkI carrier

[Doghouse]

HI Rick, same again- I would be very grateful for a copy of the plans for some of those items- let me know if you want something for the trouble :u)
Best wishes from Ireland mate

[Philliphastings]

I too would be keen to obtain two of the cast bren sockets for the Mk1

Cheers

Phill

[Rick DeBruyn]

Thanks for all the interest in the parts, will update the site when news comes in. We’re in queue for a bronze pour, also to try and keep the costs low they have placed us in a lower priority. It will take a little longer to get our parts but will be a little easier on the pocket book.

Jordon, I will think about what is involved with the lower cover thumb screws and let you know, I need a few as well.

David on the plans; I believe your referring to the thread “Armor CAD Drawings” http://orbit.dnsrouter.com/~mlu/foru...t=13100&page=2 I don’t have access to the DXF files, at some point drawings could be made available…will post here if that can happen. The casting patterns were made by a 80 year old retired pattern builder and are not in electronic format…he made them the old-fashioned way, out of wood.

Best, Rick