|
|
|
|
#1
15-09-10, 09:02
|
|||
|
|||
Cad Drawings
Is there anyone who will send me the cad drawings, as freight costs for the finished product to here would be horrendous. I need to do all the front armour. Thanks.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
#2
15-09-10, 10:15
|
||||
|
||||
|
i have center bulkhead and sides CAD'd i am still trying to do the front plates... Lynn i can email you the DXF's and can post you copies of 1:1 drawings of the front armour if this is of any help to you ?
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#3
15-09-10, 10:26
|
|||
|
|||
|
Richard
Sounds good to me. Whats next?
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#4
15-09-10, 10:44
|
||||
|
||||
|
Email adress matey. If you email Rick he may give you the front DXF's alternate i will get another card tube and start plotting......takes me ages to draft them out though..i need to do a set for one of the lads here to CAD up. Mind folks looking at Ricks prices if you are on the same peice of rock / country as him that is a pretty good price
 also Rick i would not cut the lower edge holes... most folk still have these frame rails on their carriers, cut the others but not the bottom edge...its better to offer the plate up and drill them, that way any discrepancies between machines wont throw the holes out of kilter......so to speak. great work though buddy well done
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
15-09-10, 10:49
|
|||
|
|||
|
Richard
Put your cursor on my name, and left click.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#6
15-09-10, 11:10
|
||||
|
||||
|
alright...smart arse hehehehehe.....you got mail mate
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#7
16-09-10, 01:07
|
||||
|
||||
|
Lynn / Richard,
I don’t have access to the DXF files, at some point drawings could be made available…will post here if that can happen. On the bottom rivet holes; the plate dimensions and hole placement was taken from both a Mk1 side plate and from a carrier with the plate removed but the angle iron / holes still in place…so I don’t see why the bottom holes wouldn’t be accurate as well as preferred. They should line up with your original angle iron or will be an accurate template if angle iron is missing. Rick
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
