|
|
|
|
#1
09-09-10, 07:05
|
||||
|
||||
Here's some stuff from Military Vehicle Profiles.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 
|
|
#2
09-09-10, 07:24
|
||||
|
||||
|
And from the 34 ft antenna manual.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#3
09-09-10, 20:58
|
|||
|
|||
|
CMP 2K1 Van body
My set up will look good to the public, however, I hope one day to change from a ford to a chev. My floor is Battleship Lino over plywood this will stay.
There are flimseys ar the back,no Jerry cans. The ws19 table is original but the slide out for writing is gone may replace? I am grateful for the help and much needed info. I was told after I relined the inside that the colour should be white ( much help from a MLUer back east) It was lined with mahogany door skins. One day maybe a picture of the seats will show up. A penthouse supplied with body and luggage rack no room for either unless I am unable to think outside the box (pun intended). Is penthouse a term for something else?  When good pictures are taken, I will post I Thank each and everyone if you for the help provided
|
|
#4
10-09-10, 00:00
|
||||
|
||||
|
Quote:
Second photo is a drawing I found in my files on the wireless body interior Third photo is the interior of a British Office body similar in looks and design to the wireless body and is for interest only. I have no idea where I originally got these photos from. 
__________________
Cheers Cliff Hutchings aka MrRoo S.I.R. "and on the 8th day he made trucks so that man, made on the 7th day, had shelter when woman threw him out for the night" MrRoo says "TRUCKS ROOLE" 
Last edited by cliff; 10-09-10 at 00:10. Reason: added photos
|
|
#5
17-09-10, 00:25
|
|||
|
|||
|
2K1 van seats
Thanks for the response,
The 3rd picture from cleatrac, the fine print mentions CMP seats. the 2nd picture from cliff is a rendition done by Bruce Parker and physically that is the only practical placement of the seats. (better than the piano stool of my picture of a radio van CWM at Vimy house) The height using a original CMP seat was raised about 2 1/2 inches, maximum for the original table. Now that the van except ceiling is full of kit it is hard to display, it is very dark. Must change the walls to white. I put a 12v light in the vent over the c5 charger but what was used originally? I renewed my Ham license to keep things legal when I got the WS19. Kids love the key on the knee. so do I Still working on putting up some pictures.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
