1940 Chev C15, Cab 11 restoration in Holland

[jaap de wit]

I used the original floorplates bob, they are stil very good.
and alex I don't now way the seat was shortend I am nearly 2 mtr tall and I fit in it so ? I putt the seat in and the battery box so I can make the test drive when the weather is good some day. for now I can show you how I did the doors last winter. the doors were rusted all over and on the bottom there where some small holes. so after sandblasting the doors I cut out the bottom part and welded a new part in, I also cut the inside bottom bracked out and shortend it 2 inch at the bottom so when there is water in the door by any change it can drip out of the door and not pillup and rust the door away.
I painted the inside with textiel paint and the rest with iron primer and when this was dry the green was putt on.
cheers jaap