![]() |
|
#1
|
|||
|
|||
![]()
I installed free wheeling hubs on an M37....... gained 4 to five miles per hour at the top end flat out........ but got greater economy driving with no tarp and the windshield folded down on the hood.... and it was a blast except for rainy days.
Unless a CMP is going to be driven extensively for long periods at highway speeds, I doubt if the trouble and cost of the conversion is worth while. For example .....Brian Ashbury drove his armored Scout car in convoy 10K on the Alaskan highway with a set of modern highway tires and with the front driveshaft disconnected and for that specific purpose it made sense. He reverted to bar thread tires and full time 4x4 upon his return. Boob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#2
|
|||
|
|||
![]()
I don't know of anyone in OZ who has made up a freewheel conversion for a CMP. We travel some long miles in our large country, and the usual conversion is to just undo the 8 bolts and drop out the front tailshaft.
Brian Asbury's Scoutcar is a M3A1 White Scoutcar like mine, and I drive mine with the REAR tailshaft out, not the front one. This makes it drive like a Mini. Front wheel drive helps to pull it around the corners. Rear wheel drive creates a lot of oversteer. It is also a lot lighter on the steering that way. I might add that the White Scoutcar has a permanent 4wheel drive set-up with no front axle declutch. We have travelled more than 100,000km in the White since 1986 when I first put it on the road. This may make it the most used White Scoutcar ever built. Regards Rick.
__________________
1916 Albion A10 1942 White Scoutcar 1940 Chev Staff Car 1940 F30S Cab11 1940 Chev WA LRDG "Te Hai" 1941 F60L Cab12 1943 Ford Lynx 1942 Bren Gun Carrier VR no.2250 Humber FV1601A Saracen Mk1(?) 25pdr. 1940 Weir No.266 25pdr. Australian Short No.185 (?) KVE Member. |
![]() |
Thread Tools | |
Display Modes | |
|
|