|
|
|
|
#1
20-11-09, 05:52
|
||||
|
||||
Look for something called Thrust
There is a product called "Thrust" It comes in a spray can, and is the best thing I have found next to a cutting tourch!
You can find it at car parts suppliers etc. The stuff really is great, and has saved me lot's of greef over the years Good Luck Mark 
|
|
#2
20-11-09, 18:56
|
|||
|
|||
|
Remove Cab Turn Upside Down and Drive Out
No just kidding, On my C60S I end up cutting the head of the bolt in the cab then lifting the cab. If you are not removing the cab all the way you must have to cut the bolt off under the spacer as well so you can remove the segments.
Then drive the old bolt out of the spacer, I re-drilled the spacer to slide on the spacer along with some anti-seize compound. Did your spacer have rubber washers top and bottom? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
