|
|
|
|
#2
05-05-09, 15:07
|
||||
|
||||
My next choice would have to be the HL tiger1 track which measures 1.75 which would be wider. But if I clip off the little tab on the one side it would come out at 1.625" so .025" over would probably be close enough.
Here is a scan of the HL 1/16th scale tiger1 track un-altered  Here is a pic of the proposed trimming of the track. The first 3 white lines is one option the second 3 lines is another option.  What do you think? It's about as close as I'm going to get 
|
|
#3
05-05-09, 15:48
|
||||
|
||||
|
how are you going to replicate the destinctive Horstman type suspension / road wheel and bogey setup ? i reckon the track will look ok you could spray them black (get the metal ones though) and then lightly sand the tread bars so the metal comes through, depending on how yours turns out i might have a go. the link pattern on the HL Panzer 3 is very close but will be too narrow for your scale.
also what else would be cool would be to make the hull out of metal 
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). Last edited by RichardT10829; 05-05-09 at 17:05.
|
|
#4
05-05-09, 16:27
|
||||
|
||||
|
A chap named Johkaz on another forum posted these links. His quote.....
This does look very close to the carrier track pictures here. http://johkaz.byethost16.com/Carrier/bren_gun1.jpg http://johkaz.byethost16.com/Carrier/bren_gun9.jpg http://johkaz.byethost16.com/Carrier/bren_gun36.jpg
|
|
#5
05-05-09, 17:06
|
||||
|
||||
|
none of those links work matey
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
