![]() |
|
#1
|
||||
|
||||
![]()
Tony I would like to help can you take a picture of what you are looking for.
Gilles UBIQUE |
#2
|
|||
|
|||
![]()
Hi Giles,
Here is a photo of what I'm looking for, its from a friend of mine who also has a 105. The threaded stud that you see was cut off by the guy who de-milled the guns in Greece, luckily his bit was kept with the gun, mine was thrown away. The flanged nut was a lucky find by him, it looks very close to the original. So, I'm looking for a 1 1/8" diameter threaded stud or bolt at least 4" long with a UNF thread and a flanged nut to fit. It would be great if someone could point me in the right direction as I failed to find much at all on the internet. ![]() This photo shows what happens when Mr Sledge Hammer meets Mr Quadrant Mount. Nastey! ![]() A number of fittings have been smashed off and thrown away. I would really like to find a replacement. Thanks for the heads up Terry, I'll try to contact Jean-Baptiste, Google translator works wonders!!! Thanks to all who have posted, really appreaciate it. Last edited by Tony R; 05-03-09 at 20:01. |
![]() |
Thread Tools | |
Display Modes | |
|
|