Looking for Canadian M151A2 Pictures....

[Scott Bentley]

Turns out that these 2 offending holes were left over from a C-2299 Comms Box. Andy H from out west has been gracious enough to send me one and some other bits to help get my RT-524 Installation together. Down the road i'll look at either a second RT-524 or a 77 Set in a 2060 Tray, as all the Cabling and Switching will be ready to basically bolt it down and plug it in.

Does anyone have an SMG Mount and an Ansul Fire Extinguisher Bracket kicking around that they'd like to trade for some M-Series parts? I looked around at work, but came up empty. These are the only bits I need now to finish filling all of the holes.

Scotty

[rob love]

Scotty
I have plenty of the SMG brackets out in the shed. I might have the ansul bracket, but I think they have surface rust. Shoot me a PM and we can work something out. I am home for the next couple weeks before I return to my winter home.

You will have to show what he two holes were for. I had noticed these holes as well on the 30 Mutts I took apart.

[Scott Bentley]

Originally Posted by rob love

Scotty
I have plenty of the SMG brackets out in the shed. I might have the ansul bracket, but I think they have surface rust. Shoot me a PM and we can work something out. I am home for the next couple weeks before I return to my winter home.

You will have to show what he two holes were for. I had noticed these holes as well on the 30 Mutts I took apart.

This is the offending box that left 2 holes on the Passenger Side Wheel Well. I managed to source a nice one from Andy out West. Although its designed to switch between two 524s, i'm going to go ahead and install it and hope a second bargain 524 shows up one of these days.

I sent you an e-mail Rob. I'm getting excited now that I can see the finish line.

Scotty

[Phil Waterman]

Originally Posted by armybuck041

This is the offending box that left 2 holes on the Passenger Side Wheel Well. I managed to source a nice one from Andy out West. Although its designed to switch between two 524s, i'm going to go ahead and install it and hope a second bargain 524 shows up one of these days.

I sent you an e-mail Rob. I'm getting excited now that I can see the finish line.

Scotty

Thought for you I used the armor version of these as the basis for an inter vehicle intercom in my CMPs I have a radio box with CB and HF radios and using them to connect the military headsets that couple to these boxes. Makes it so you can talk in the cab of CMP at something less that a scream. Also you can talk to other vehicles in a convoy.

[Scott Bentley]

Originally Posted by Phil Waterman

Thought for you I used the armor version of these as the basis for an inter vehicle intercom in my CMPs I have a radio box with CB and HF radios and using them to connect the military headsets that couple to these boxes. Makes it so you can talk in the cab of CMP at something less that a scream. Also you can talk to other vehicles in a convoy.

I was under the impression you needed an AM-1780 Box in order to get the C-2298 working for Vehicle Intercom (VIC 1 System)? Were you able to get Intercom with just the C-2298 on its own?

Its an interesting idea. I havn't actually even driven this little demon yet, but it may be a good idea depending on the highway noise.

Thanks

Scotty

[Phil Waterman]

Originally Posted by armybuck041

I was under the impression you needed an AM-1780 Box in order to get the C-2298 working for Vehicle Intercom (VIC 1 System)? Were you able to get Intercom with just the C-2298 on its own?

Its an interesting idea. I havn't actually even driven this little demon yet, but it may be a good idea depending on the highway noise.

Thanks

Scotty

Hi Scotty

Here is the units that I have tied together as intercom using the PA in a CB as the amp for the intercom. I'll try and find my wiring diagram and post it. I'm not sure that the unit I used has the same functions as the C-2298. I'll check with some our radio guru's.

Yes the head sets do cancel out the road noise and engine, gear box noise.

[Scott Bentley]

Big gap in posts on here, but as you could expect, I got close to the finish and spent every last minute getting it done.

Its not restored, far from it. That will come later. But for now it is now 99% complete parts-wise, all original, Street Legal, and running well.

Thanks for all of the help so far from everyone here.

Comms install is next

Now some pics:



Now, if I could just resist the urge to drive it in the winter

[maple_leaf_eh]

Originally Posted by rob love

Scotty
I have plenty of the SMG brackets out in the shed. I might have the ansul bracket, but I think they have surface rust. Shoot me a PM and we can work something out. I am home for the next couple weeks before I return to my winter home.

Dig out a two of each, one set for Scotty and one set for me. Also, do you have any of the FNC1 boots or spring clips?

PM me with the price. Ship by Canada Post low and slow is fine with me.

Terry