MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Softskin Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-11-08, 02:50
Jim Price's Avatar
Jim Price Jim Price is offline
'40 Ford F8, 4 x 2
 
Join Date: Mar 2008
Location: Chandler, Arizona U.S.A.
Posts: 373
Default Day 146

This past week was an almost non-productive one. Bob, my helper was out for a day, and I went over to California for a long weekend starting on Thursday. I buy, sell and trade militaria of all kinds and was at a militaria show in Pomona. Didn't sell much but have nearly cornered the market on size no. 3 British gaiters, having purchased some 35 pairs!

We were able to attach the front frame to the bed. As mentioned before, we had a new bed made and it was a bit smaller width-wise and so we had to cut and weld the original piece. It had also been twisted and bent and that took a bit of finesse to get it straightened. I'm picking up the steel plate that goes over this frame tomorrow. Pictures are below.

Now for some bad news. When filling the radiator, we soon noticed water coming out the back of the oil pan, not a good sign. We stopped with the water, took off the pan and put more water in the radiator to see where the leak was coming from. It was the No. 4 cylinder, right rear.

We then removed the head and pushed out the piston and found at least 4 holes in the cylinder wall, one the size of a three pence piece! Needless to say I was astounded as we had just the week before ran water through the heads to flush out the water jackets. We must have by chance left the piston over these holes and thus did not discover the damage.

I am pursuing legal remedies regarding this matter and cannot got into details of the purchase of the engine. I will say that I took what I considered to be sufficient steps to protect myself on my purchase and my attorney has agreed with me.

End of story! Well, not completely! Not to be discouraged I immediately beat the bushes and located another engine which is for sale by a local antique auto parts store who has guaranteed it to be a "runner." I'm having a look at it tomorrow and will be sure that I obtain a well-written, cover-my-tush, bill of sale!

Lesson learned! One can't do too much to be sure the engine they're buying is everything the seller says it is!
Attached Images
File Type: jpg MVC-145S.JPG (31.6 KB, 56 views)
File Type: jpg MVC-146S.JPG (27.5 KB, 55 views)
Reply With Quote
  #2  
Old 04-11-08, 03:17
Keith Webb's Avatar
Keith Webb Keith Webb is offline
Film maker, CMP addict
 
Join Date: Feb 2003
Location: HIGHTON VIC
Posts: 8,218
Default Engine woes

That's terrible!

I hope you can get things sorted without too much expense or trouble.
__________________
Film maker

42 FGT No8 (Aust) remains
42 FGT No9 (Aust)
42 F15
Keith Webb
Macleod, Victoria Australia
Also Canadian Military Pattern Vehicles group on Facebook
https://www.facebook.com/groups/canadianmilitarypattern
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 16:23.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016