track drive sprockets

[Andrew Rowe]

Hi Richard , Lynn is right about using / changing out sprockets several times on the same set of track. Also check track tension, that you not running too loose.
As I have said I have seen Loyd brake drums with the same type of wear.
Usually on a standard carrier , new track will sit square to the brake drum, the more the track wears, when you look from the back end, you will see the track sitting on an angle , the more the angle suggests the greater the wear on the track, the Loyd mitigates this a bit by using the extra track edge supports.
Pic shows sprockets in the "grease" , cheers Andrew.