Lynx1 No.23 Home!

[Andrew Rowe]

Hi Harry, the main two different things when you use a C15A ,( C8A ) single speed transfer case to convert to a Lynx is the input shaft is different, and can interchange out. The speedo drive gear that goes on the intermediate shaft is reversed cut in the opposite direction ,( drive gear ) so that has to change out if using a standard transfer case, and yes the driven gear comes in MK1 and MK2 , because of the change in diff ratio's , it is about a tooth difference from memory, also check speedo end turns freely , as this can be a source for braking a shaft cable if it has not been used for a while. I still have those other parts here for you as well, must get organised, Cheers Andrew.