![]() |
#2
|
|||
|
|||
![]()
Here are the measurements of the spring on my C8 1940 front seats.
Rings (9 per seat) Wire thickness 3mm Overall diameter 25mm Centre springs (18 per seat) wire thickness 1,5mm 40 coils Outside diameter 9,5mm about 85mm overall length including the hooks top and lower springs (6 per seat) wire thickness 1,5mm 48 coils Outside diameter 9,5mm about 94mm overall length including the hooks The top 3 springs and lower 3 springs are longer than the ones in the centre. Rings seem to be welded at the end....it's not solder as I heated one and nothing melted....except the skin of my finger ![]() My seats don't have the springs as shown in Peter's picture (with one long hook)....maybe a difference in supplier at the time?? or Ford vs Chev? early vs late? Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
CMP Seat Back Springs | DaveBuckle | The Restoration Forum | 1 | 10-06-21 07:48 |
CMP Seat back | Vincent BLASSIC | The Softskin Forum | 3 | 02-08-18 00:37 |
seat back | jason meade | The Softskin Forum | 2 | 10-08-12 03:31 |
Spring is back!! | NORTH-SHORE(CANADA) | The Softskin Forum | 8 | 10-05-08 13:54 |
spring seat question | Rob Dyba | The Carrier Forum | 1 | 29-07-04 06:48 |