|
|
#8
05-01-13, 11:15
|
|||
|
|||
For Peter:
On the normal Canadian MKIII plug, pins 9, 10, 11 & 12 are not used. Not sure about your key rotation. Early plugs were fixed but later shells could be rotated. For Mike: It sounds like you have a connector for use with the British HP amplifier. The 6 pin versions were #14 & #16 and the 12 pin version was #27. The 2 pin lead went to the socket marked "control" on the front of the amp. Last edited by Bruce MacMillan; 05-01-13 at 11:22. 
|
|
|
Threaded Mode