#1
|
|||
|
|||
Shaft adjustment on rear axle of m38a1
Hello
During the dismountage of the shaft of the rear axle of my JEEP M38A1C (in the aim of replacement of the inner oil seal), I saw some shims between the bearing and the bearing retainer.These late where only on the left side of the axle. On the technical manual I own : TM 8014 OPERATION AND ORGANISATION MAINTENANCE , there is no explaination about these parts. I suppose that they should be used for a specific adjustment Is any body who could to explain me the method that I have to follow for the adjustment using these shims. Regards |
|
|