paint for mutt
Hi- having restored 3or 4 ex army vehicles in my time in my opinion it is not necessary to sandblast -I would prefer a good wire brushing -what is left will probably be as good as anything you will put over it -also these were not Cadillacs so a prefect finish is probably out of place -I would suggest you use a two part primer and put the finish coat on within a couple of days or you should sand the primer - for the floor inside I used the truck box liner stuff with the paint so it is not noticeable but it stands up -I made a rotissery for my mutt which hooks to my hoist so I was able to roll it anound by myself -saved a lot of trouble -for a finish underneath I used Can Tire black tarry spray cans -I store the mutt in a shed so I hope it will tast forever-we are blessed here with back roads to drive these things -a necessity for full enjoyment - Greg
|
21-11-08, 03:06
Threaded Mode