![]() |
#11
|
|||
|
|||
![]()
Bob,
It's fascinating to see the detail differences between the different models in de CMP family, even the ones produced during the same period! I have added a few pics which show the configuration of the C8 brake lines....well, least on mine ;-) Fitting the brake hoses directly to the frame rails makes sence, but somehow the Chev guys choose to do it different with the C8 (at least have seen this on 3 different C8's). The C8 has a bracket which holds the brake hose. At the rear the configuration is also slightly different from the C15A....on the C8 a bracket is welded to the rear exle, which holds the brass brake tee and secures to the brake hose. The other end of the brake hose secures to a bracket riveted to the right hand frame rails. I also added a piece of a picture from Clive's factory photos CD showing a similar rear brake line layout on a MCP Chev. Last but not least is a picture of the (front) brake tee secured to the frame with a clip. Quote:
Quote:
Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle Last edited by Alex van de Wetering; 18-05-13 at 15:26. |
Thread Tools | |
Display Modes | |
|
|