#1
|
||||
|
||||
New project
Just Picked up another project to work on
Jeff |
#2
|
||||
|
||||
.
Ah Jeff - You'll be getting someone overseas very excited..
__________________
Charles Fitton Maryhill On., Canada too many carriers too many rovers not enough time. (and now a BSA...) (and now a Triumph TRW...) |
#3
|
||||
|
||||
what an excelent base for a project ! i am green with envy ! is that a hole cut in the lower hull next to the rear bogey,or is it a trick of the light ? you are lucky the centre bulkhead and ducts appear unmolested. and you have some swanky looking sand guards too.....
looks like you will be riveting shortly then do you have any details on the numbers lower tub / armour etc etc ?
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
#4
|
||||
|
||||
And dont forget there is pre-cut plate for sale around for the easy restoration.
Saw it at the OMVA show in Acton this February. R |
#5
|
||||
|
||||
Here is a photo of the plate Robin is refering to.
Barry
__________________
Every twenty minute job is one broken bolt away from a three day ordeal. |
#6
|
||||
|
||||
Plate
So how do I get that on the west coast?
Carrier serial #13877 Hull12874 motor 13873 built feb 43 Jeff |
#7
|
|||
|
|||
Truck!!!!!!!
|
#8
|
||||
|
||||
armour
Long drive
How much to ship and of course who has them and how much? Back to the old question who has the pattern on a disk? |
#9
|
|||
|
|||
Jeff
Ben and I have done a lot of work on drawings.
I am looking for a Good steering wheel, and he is looking for a good spare barrel box. Your thoughts.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... |
#10
|
|||
|
|||
I was wondering where the SHoC carrier had got to... Glad to see it is in good hands and being worked on...
|
#11
|
|||
|
|||
Also, I need all of that plate too... Who is the supplier, or where to get on the west coast?
|
#12
|
|||
|
|||
Trucking is cheap these days. too cheap but thats my problem.
|
#13
|
|||
|
|||
I need a set of plates as well. How about a bulk order for several sets. I can pick up in maple ridge or hope.
Roberta aka universalgrl
__________________
Roberta Jayne Melville CD II QJ MK I * universal carrier 1942 WLC Harley under restoration 1957 M38A1 jeep R.E.L. optical equipment Military manuals Field phones MK II 19 set (needs work) 4 MK III W-19 sets AN/PRC-9 CPRC-26 WS-29 componets WS-38 AFV WS-38 MK III WS-48 with generator WS-58 MK I MK V heliograph |
#14
|
|||
|
|||
Sure... I'll be on the Island several times in the next three months, so you may be able to meet me in Victoria.
|
#15
|
||||
|
||||
i provided drawings to Doug Lavoie and some of the lads over there.. there are CAD schematics for the side and rear armour plates and centre bulkhead out in the domain too, i know this as i had a hand in creating some of them. i would not care i have just binned all the plywood patterns i had for the front armour....typical ! i would be warey on some plans out there as they are utter utter tripe.. i have seen some where the dimensions are way out ! i have not seen Lynn and Bens work on this front yet but i have no doubt it will be top drawer and deffinately worth a swap for a steering wheel and two bren spare barrel boxes ! at least you know they will be correct and it really does make a difference rather than scratting about for six months like myself and Rick De Bruyen did
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). Last edited by RichardT10829; 08-03-12 at 10:13. |
#16
|
||||
|
||||
Headlight
i picked up a Hedlight yesterday From My Brother. I had origional bought the light for $20 bucks in a surplus store 22 years ago . The head light was sold along with a 1942 CMP to my Brother .
The cmp is long ago sold but the light was sitting in a shed and had missed being thrown out as scrap 2 months ago . My brother was nice enough to save it for me but i had to come pick it up. In Prince George B.C. only a 530 Mile drive from my house. I drove up Tuesday after work and came back wed I also found a leed on two ww2 Jeeps . anyways The Carrier I picked up from the Seaforth Highlanders is in Need of 1 Head light and now I have it. I will have to modify it to fit the Carre Mounting Brackes but thats how it goes. Jeff |
#17
|
|||
|
|||
Before you modify anything, post in the for sale section. It seems like guys with mk2 carriers only find mk1 headlamp bodies, and mk1 carrier owners only find mk2. Maybe someone will be willing to trade.
|
|
|