Bumper dimensions

[Maurice Donckers]

Hi all , a friend of mine is rebuilding a no 12 cab chev quad.
He is missing the bumper , and the rear winch horizontal roller and brackets
Is there anybody willing to measure the length, hight, and thickness from an early folded bumper, also size of the jewell hole, and how far from the end of the bumper.
Thanks

[Jos Hamminga]

Hi Maurice,

Give me some time and I will take measurements from my F60L. It's a Cab 13 and not a Chevy but a Ford, not sure if that's a problem?

I will come back to you.

Cheers,

Jos

[Maurice Donckers]

Should be the same, except for the mounting holes , and brush guard.

[Jacques Reed]

Hi Maurice,

I made this drawing a few years ago for Ivo Rmoutil. It is for a Ford Cab 13 but some dimensions for a Chev cab 12 may be the same such as the overall dimensions and jewel holes. It may help.

Regards,

[Mike K]

The early cab 11 bumbers , as was fitted on my C8, were folded from plate steel - these bumbers have a noticeable radius to the corners of the profile. Sometime during production, it looks like they changed the profile to a sharp edged C channel shape.Cast steel maybe ?

Pic 1. Cab 11 round corner bumber

Pic 2. Cab 12 square corner bumber

[Maurice Donckers]

Mike there is no rule i think for folded against rolled. My C15 no11 cab has a rolled one .and some other no 11. Cab wrecks i have seen in the past also have rolled bumpers, but 12 cabs seem to have more often folded ones. Why?

[Maurice Donckers]

Jaques thanks for the drawing , that will do .

[Maurice Donckers]

Hi Jacques ,
I have tried to enlarge your nice drawings to read the dimensions , but they are blurred , is there another way to post it ?

[Hanno Spoelstra]

Originally Posted by Maurice Donckers

I have tried to enlarge your nice drawings to read the dimensions , but they are blurred , is there another way to post it ?

Hi Maurice, click on the attachment to see the full size picture (and check your email).