need special 19 set dogbone

Bruce MacMillan · #1 08-09-12, 16:45

I was about to sacrifice a regular dogbone but thought I should ask here first.

My WS19HP (Can) is restored but I need the dogbone that goes between the power supply & the amp. This looks like a regular one but is wired differently. It is also keyed at the 2 o'clock position, not the usual 4 o'clock.

Part # from the manual is Conn. 12 point C19-1.

Hopefully someone might have the piece and wonder why it wont fit a regular 19 set.

I would like to spark this baby up soon.

Bruce Parker (RIP) · #2 08-09-12, 17:10

Quote:

Originally Posted by Bruce MacMillan

I would like to spark this baby up soon.

Wait a long...LONG time before you touch that great big capacitor smack in the middle of the power unit. It tends to hold arm tingling charge for a while. Ask me how I know.

Bruce MacMillan · #3 08-09-12, 18:40

Ah yes, the HV hand jive! Done that a couple of times. Certainly reinforces the one hand rule.

To test the psu I had to remove it from the case and bypass the interlocks. You respect 1300 vdc.

BCA · #4 09-09-12, 03:40

Hi Bruce,
From the bowls of the warehouse appeared a correct dog bone as you require. NOS, and correctly marked. I also have a few of the regular "4 o'clock" dog bones
PM me for details. ..... Brian

Bruce MacMillan · #5 09-09-12, 20:44

Thanks Brian, PM sent

Peter Hommes · #6 04-01-13, 21:25

Hi.

Can you tell me if the normal not connected points in the centre are used? I have an odd one that is at four o'clock and has extra wires in it.

regards

Peter