|
|
|
|
#1
29-11-08, 05:16
|
||||
|
||||
Chrysler Prototype
Do a search on google for chrysler prototype truck.
There is apparently one for sale in Cantley quebec. Has anyone else spotted this rarity coming up? Robin 
|
|
#2
29-11-08, 09:33
|
||||
|
||||
|
You mean this one?
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern
|
|
#3
29-11-08, 13:04
|
||||
|
||||
|
Bears a strange resemblance to the Australian XF4, a trials vehicle which also dates from around 1969, and also the Land Rover 101" Forward Control. Must have had the same common tastes in ugly in those days!
|
|
#4
29-11-08, 15:46
|
|||
|
|||
|
Similar to.....
Hi Tony
It should be similar as a number of models were submitted to the Canadian government for testing...... I understand it was an attempt at replacing the old M series Dodges. They put out proposal with specs to various suppliers. The testing was done at the LETTI (spelling ?) site in Orleans/Ottawa. They tested this model of Chrysler, some very similar COE Volvos, Land Rover and Steyr. Whent he deal fell through all the imported trucks were scrapped apparently because they had never been certified for use in CANADA. Why were the Chrysler sold off as surplus escapes me. there were 7 of these handmade prototype..... all aluminium bodies...fully independent A frame suspension. Disk brakes on all four wheels mounted inboard inside the water tight hulls. Both front and rear axles had a strange spacer between the cast axle housing and the sheet metal cover...about 3 inches thick and contained coolant circulated by the engine to keep the axle frm over heating. To do daily service of the engine you can reach it under the large bench seat and about as practical as a cab 11. Any significant work is best done by removing the floor plates in the cargo box and crawling down into the hull cavity. It probably still has the original 318 chrysler industrial engine. Trucks rides exceptionaly smoothly with the large 14x20 tires. All suspension parts, U joints and brakes are standard 1969 over the counter parts. It floats and will propel itself with the tire rotation quite well. A bit scary as it tends to ride/float nose tilted forward without a load. The truck's tailgate is scallop in the middle and reinforced to take a large 50 HP outboard motor that was modified with a long foot extension like use on sailboats..... propeller was fully enclosed on a shroud and wire cage. Of the seven prototype this one was the keast damaged and had been used for extensive photo shoot...... some top structure modifications done by the military was done to the rear of the cab..... very professionally done.... it provided extra ventilation for the hull engine compartment. On the pass, side the cargo tool box slung underneath had been damaged when backing up into a garage with the panel door open..... being aluminium it bent and was never fixed properly.... that container had rubber gaskets and fully water tight. So from my failing memory.... 7 prototypes... one for sale in Cantley the best one at the time.... one at the P&S Kars museum... one was for sale on the West coast... Vancouver ??? one was for sale in the US on a Dodge power wagon forum...... one was alledgedly destroyed at LETTI by driving repeatedly fully loaded off a 3 foot drop..... they were looking for broken components.... apparently the aluminium hull eventually cracked catastrophically .....by then everything else had been shacken loose.... the others....??? IN the ealry 70 they were driving them between Ottawa and Montreal in two shifts trying to wear them down....... I have never seenone being towed back to the compound..... on the other hand when they were testing the little Western abortions it was common to see them being towed back from my rural area East of Ottawa...... drivers carried early bulky telephone for obvious reasons. I wish I had the $$$$ to buy it. It was never in service but it was CANADIAN The original cost was $5000 with a dump truck full of parts including extra narrow rims with 11x20 tires  Boob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#6
29-11-08, 18:30
|
|||
|
|||
|
Neat truck
There was also one at the Chrysler parts plant in Mississauga. They did deliveries with it and I passed it occassionaly on the 401 near highway 10. Then when it turned off one day at Mississauga rd. I followed it south to the plant. A phone call revealed it was a working truck and not for sale.
Long ago. Peter S
|
|
#7
29-11-08, 20:21
|
||||
|
||||
|
$20,500 obo
Quote:
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$?
|
|
#8
30-11-08, 16:12
|
||||
|
||||
|
Quote:
Quote:
__________________
Regards, Hanno --------------------------
|
|
#9
01-12-08, 01:27
|
|||
|
|||
|
Possible source of Mike's pictures....
First picture is from the P&S Kars museum....
The second one I beleive was an original DND released picture and an early one at that..... look how short the cab upper part is..... compare to the Cantley one.... DND had added some aluminium enclosure behind and attached to the cab to provide for some ventilation to the water tight hull... The final picture..... that may be the missing seventh truck... looks like personal use...... just after comingout of the water........ everyone sitting in the far back section wasno doubt an attempt to level the truck when floating.... which tended to be nose heavy..... looks real good without the top. By the way getting in was a bit of a climb.... that is why they had a step ring on the front wheel with some kind of screen expanded steel welded to it. Thanks Mike.
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
|
#10
04-12-08, 08:43
|
||||
|
||||
|
Dodge Ram Prototype
Guys,
if you check out Issue 44 of Pat Ware's Classic Military Vehicle magazine (dated Jan 05). There is an article on page 9 about this vehicle and it was For Sale then.
__________________
What I state is my opinion & my opinion only It's not what you know It's not who you know It's what you know about who..
|
|
#11
06-12-08, 03:50
|
|||
|
|||
|
Can we see it.....
...any chance to scan and post the article for us to read & see......
BooB
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
 |
|
|
Hybrid Mode
