|
#1
|
||||
|
||||
2011 at the Hammond Barn
It is 6oC and the snow is rapidly disappearing. The yard is a quagmire, so my plan to drive the HUP on the first day of the New Year got shelved. Instead I took up Bill's invitation to visit him in Greely, a small town south of Ottawa.
Finding the place was very easy; all I had to do was look for a CMP. Sure enough, I recognized a familiar vehicle outline and pulled into his yard. Bill gave me the cook's tour of his CMP based snowplough and his workshop. Later, I will add photos showing how he took a CMP truck that had been converted to a forklift, and converted it to his snow removal machine. Later on, we took a short drive in the local area and tried to speak to the owners of various military vehicles that we spotted from the road. We got no response but had a look at the vehicles anyway. A return visit will take place sometime soon and the results of the visit will be posted later. Back at Bill's place we chatted about other CMP wrecks, including one with a built in winch set up. We had previously discussed this truck at Bob's place when Bill picked up his replacement axle. So, stay tuned as we prove the old adage" Time spent on recce is seldom wasted"!
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? |
#2
|
||||
|
||||
Bill's CMP Snow Plough
Notice anything out of the ordinary with this "conversion"?
Photo 1 - The CMP as Bill bought it Photo 2 - Stripped down Photo 3 - Framing Photo 4 - Cab Photo 5 - Finished product Thanks to Bill for providing these photos
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? Last edited by RHClarke; 01-01-11 at 20:22. |
#3
|
||||
|
||||
More Snow CMP
Photo 1 - The broken axle
Photo 2 - Interesting "front" end If I recall correctly, Bob knew about Bill's forklift. Maybe he can fill in some details?
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? |
#4
|
|||
|
|||
Congratulations on another fine year at Hammon
Hi All
Congratulations on another fine year at Hammon Barn, thanks Bob for the concept and venue for a shared work environment. Now if I could just find a bunch of CMP nuts down here to share work space and projects. Look forward to another fine year of entertainment. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#5
|
||||
|
||||
First Convoy of the New Year
Bob and I rolled out our CMPs this afternoon. The weather has changed for the colder so there is less mud to worry about. Bob's truck started on the very first crank, but the HUP took a little more time to fire up. After warming up for a few minutes, we headed up the road to Bob's house. Unfortunately, my engine wasn't running all that well.
Back at the barn, I checked the wires, plugs and dizzy. All seemed in order. On restart I got the same problem - the engine seemed to be missing resulting in rough acceleration. We did not check the timing as time was running out and I had to head for home. So, given a 235 engine with a manual choke, what would cause it to idle nicely, but get rough when accelerating? Any thoughts?
__________________
RHC Why is it that when you have the $$, you don't have the time, and when you have the time you don't have the $$? |
#6
|
||||
|
||||
From what information you have provided, this to me sounds either:
Timing - is either to advanced or retarded, or the vacuum/mechanical advance are not working properly Carburation - The high-speed circuit or the accelerating pump circuit may be dirty or plugged Neil |
#7
|
|||
|
|||
Yep..
Quote:
__________________
Alex Blair :remember :support :drunk: |
#8
|
|||
|
|||
Strange as it ran beautiful before.....
Plugs were sooty but cleanable....... loss of power when throttled hit for accellaration..... almost to the point of stalling...which it did on occasions!!
Problem maybe with big boots and accidently hitting the dizzy while shifting or just plain getting on and off. Gas.....Yes.... maybe old..... a few gallons fo fresh stuff may help..... with added Sta-Bill for safe measure. It was running so smooth and accellareted well last time out a few months ago. Timing will need to be checked..... and man do you have to be double jointed to do that.....even if half the sheet metal is missing it is still difficult to twist your head around to see the pointer and TDC..... As we will need to disconnect the vacuum advance to tune up we will check the holding power of the vaccum advance diaphram.... or leaks on the way over to the carb. Two solutions come to mind........ go underneath and once timed properly with the engine turned by hand until pointer is at TDC.... grind a notch in the flywheel where it meet with edge of flywheel housing.... always dark there and easier to see....although it becomes a two men job.... Second temporary solution....cut, fit and install a piece of sheet metal to protect hitting the dizzy...... Hopefully it will not be minus 20C when we do that..... Boob
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
|
|