|
#1
|
|||
|
|||
CMP tool box and spare tire holder plans
I need someone to help me on this problem .I made up over 60 copies of How to make this tool box and sent them from Findland to Austraila .Lately I have been getting request for copies but I never saved a copiy for my self . Does anyone have a copy that they could post on MLU for those that want to make one ? Thankyou
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank |
#2
|
|||
|
|||
Hi,
just to say I appreciate the lengths you are going to and hope someone can help. Best regards Andy
__________________
Andy C15A Bsa parabike Landrover 86" TX1 London Taxi Bonneville Monkey bike 1943 GPW Australian |
#3
|
|||
|
|||
CMP tool box
When I did this I didn't keep a record of their names .I do remeber a couple and they are looking for them . I have found some pictures but don't have the measurments
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank |
#4
|
||||
|
||||
Plans
George,
I have found the Original Thread. That may help you track down any PM's you may have sent/received around that date.(?) I note Bob C replied, still got a copy, Bob? Good luck, I hope you can track 'em down!
__________________
Howard Holgate F15 #12 F15A #13 (stretched) F60S #13 C15A #13 Wireless (incomplete) |
#5
|
|||
|
|||
Ah think so....
Were these the hand drawn notes George....... must have them filed inside one of my shop manuals.....
Will look for them.... Bob C
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
#6
|
|||
|
|||
CMP box
Great guy .At the time I sent them I couldn't get them posted so I mailed them .Bob They were hand drawn You will be a real hero if you could post them .I know that Mike in Windsor ONT had a set also .
__________________
George is hooked on OD 5 window DT969 8 ton Fruehauf trailer M2A1Halftrack ,CMP #11 F15A1 #13 F15A1 RAF Fordson Tractor, 42 WLC HD No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407 Hull plate # 7250 all have walk plate on back steps 1917 Patent modle amphibious army tank |
#7
|
|||
|
|||
Chevrolet C15A GS Tool Box/Spare Wheel Carrier
Gentlemen,
Not posted on MLU before. I have a 1944 C15A GS which is being restored at the moment. Unfortunately my truck doesn't have the tool box/spare wheel carrier fitted between the cab and the rear body. I know that the elusive tool box is very hard to find, but before I go down the fabrication route, I thought I would ask if anyone has one they are willing to sell to me? No doubt this is a bit of a long shot, but no harm in asking. Thanks Andy Fraser
__________________
Andy Fraser 1944 C15A GS 1943 Dodge WC52 |
#8
|
||||
|
||||
Andy, welcome to the forum
Yes, this box and the associated clam shell tire carrier is a tough one to find. After all these years I am surprised that nobody has got into making reproductions of the shell brackets as the rest of the carrier and the tool box are simple enough to fabricate
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1981 MANAC 3/4T CDN trailer 1943 Converto Airborne Trailer 1983 M1009 CUCV RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers |
#9
|
|||
|
|||
Thanks Chris. The clam shells do look difficult to produce.
__________________
Andy Fraser 1944 C15A GS 1943 Dodge WC52 |
#10
|
||||
|
||||
Would be a labour of love for a toolmaker to build a proper set of stamping dies then have the press with the tonnage to stamp them!
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1981 MANAC 3/4T CDN trailer 1943 Converto Airborne Trailer 1983 M1009 CUCV RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers |
#11
|
||||
|
||||
The clam shells can be done with truck steel wheels cut in half and trimmed with a plasma cutter . It’s hard to tell the difference and it’s cheap . Try it .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer X 2 / 94 LSVW Last edited by Robert Bergeron; 24-09-20 at 03:40. |
#12
|
||||
|
||||
How does the Cab 13 tool box fit to the chassis?
http://www.mapleleafup.net/forums/sh...ad.php?t=23955
__________________
Regards, Hanno -------------------------- |
#13
|
||||
|
||||
Quote:
By Mike Timoshik: http://www.mapleleafup.net/forums/sh...4810#post94810 And JoćoBoscoBarbosa: http://www.mapleleafup.net/forums/sh...ad.php?t=25612
__________________
Regards, Hanno -------------------------- |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
M37 spare tire wing nut $50 | Les Fisher | For Sale Or Wanted | 0 | 28-01-20 21:18 |
Reference: Ford CMP Truck- Battery Holder plans | Jacques Reed | The Restoration Forum | 14 | 17-09-12 22:35 |
Sold: 15 cwt Spare Tire Carrier/ Tool Box | Colin Alford | For Sale Or Wanted | 7 | 19-03-10 01:52 |
Reference: Plans How to build a tool box for a CMP truck | S. Dafoe | The Restoration Forum | 152 | 06-07-09 00:54 |
Vickers spare barrel holder | ron | The Carrier Forum | 11 | 28-05-09 17:08 |