|
|
|
|
#1
14-03-09, 15:24
|
|||
|
|||
Flimsy fuel can flex hoses/spouts 19 sets ect
I picked up a couple of the "horse Co*ks" for the square flimsy fuel cans.
Asking $50 each plus shipping...there is a little surface rust on them..but it can be cleaned off..if you need photos send me a PM with your emaiil address. I also have a few of the mounting bars for the 19 Sets and some mounting straps, both lengths...and a few ariel cone shaped mounts...can't make it to any shows until June and my storage space is full..so I am offering them here Dean Ajax Ontario Last edited by Dean (Ajax); 14-03-09 at 16:39. 
|
|
#2
15-03-09, 00:24
|
||||
|
||||
|
DO you have any of the #3 mounting straps for the WS19.
Ive got a #1 and #2 strap but can't use the #2 in my application. The PSU needs to go on top of the A/B set.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#3
15-03-09, 02:09
|
|||
|
|||
|
Jordan, I know nothing about any types oof radios..I just have the mounting bits for the 19 set...can you send a photo of the strap you need..or some measurements?
Thanks Dean
|
|
#4
15-03-09, 15:13
|
||||
|
||||
|
Parts list
Quote:
__________________
Quis custodiet ipsos custodes?
|
|
#5
15-03-09, 17:32
|
|||
|
|||
|
Quote:
What kind and size of CMP do you need it for? As to your carrier please confirm whether it's a ZA10316 or ZA10315. Bruce
|
|
#6
15-03-09, 17:35
|
||||
|
||||
|
This is interesting, I did not know that CMP's like my F15A even had built on antennas ......... any pics of what they would look like ? also what kind of radio would they have gone to ? portable or built in ?
any pics and info would be great ......... neat twist on CMP's
__________________
Terry British Columbia , Canada 1942ish F15441-M
|
|
#7
16-03-09, 10:05
|
|||
|
|||
|
sapper740, I sent you an email last night, I will get some photos to you in the next day or two, I picked up some more of the straps and more of the "mount carriers" yesterday..along with more ariel mounting bit...gotta sort them out and dig out the other bits I have for the 19 Sets that are in storage right now.
Too be honest, I know very little about these radios, I was just lucky enough to find the mounting parts on my travels Dean
|
|
#8
17-03-09, 03:17
|
||||
|
||||
|
Here's some pix Dean sent me so I downsized and posted them. Now we can all figure out just what he has. One thing for sure there's lots of mounting brackets.
Just which brackets and straps would be needed to mount the set in a CMP? As for the aerial mounts, which type of aerial would the cones be for? I assume the cones and 6 holed plates go together.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#9
18-03-09, 02:48
|
||||
|
||||
|
Quote:
My CMP is licensed as a 1942 C15. It has the 13 cab, modified to Left-hand drive, and the frame was lengthened to give it a wheel base of 135 1/2". It had no box when I bought it but was told it was originally a Wireless van. Who knows?
__________________
Quis custodiet ipsos custodes?
|
|
#10
18-03-09, 06:41
|
|||
|
|||
|
Thanks Dean,
It seems the spout screws on to the threaded outlet.
It must have been slow to empty when you compare the CMP and UC funnels, which allow a can to be up-ended to drain. Have you found any stampings like a broad arrow? cheers Rob Last edited by Rob Beale; 18-03-09 at 06:43. Reason: typo
|
|
#11
18-03-09, 15:55
|
|||
|
|||
|
Quote:
These horsecocks will also attach to the threaded spout on the bottom of the funnels.
|
|
#12
18-03-09, 23:31
|
|||
|
|||
|
Radio Straps...... replacement
I have a small quantity of 2.5 inch green webbing..... each about 40 inches in length. They are not the thickest webbing but might have the right look.
If interested..... small contribution to MLU will get you some. Guy
|
|
#13
03-04-09, 03:54
|
||||
|
||||
|
Hi Dean
Do you still have any of the long WS19 straps left. If so how much please
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer
|
|
#14
03-04-09, 04:17
|
|||
|
|||
|
I still have a few straps of differant lengths..I also just picked up a couple of 19 sets..and hardest of all to find a WW2 Canadian made and marked wooden 19 set radio tray with all the hardwear including the strap handles on each end with the wooden grips..I have never seen one of those before..and in near mint shape..contact me at northman@rogers.com and we can work something..
However I will have to ask for payment BEFORE I ship an item out to you...I sent out a few items to some others onlly to find out they cannot pay for sometime..if ever!! Sorry about this..it took me by surprise. DEan
|
|
#15
03-04-09, 06:51
|
|||
|
|||
|
no payments...
BRUTAL!!!!!! Dead-beats.
|
|
#16
03-04-09, 22:10
|
|||
|
|||
|
Quote:
be prohibitive. 8-(> If you send me photographs of the bits you've got, I'll do my best to identify them and tell you what they're used for. (WS19 parts only, though!) Best, Chris.
|
|
#17
03-04-09, 23:05
|
||||
|
||||
|
Chris, I've been looking at my 19 set stuff and can't quite figure it out. I can see how the short strap will hold down the power supply but the holes on the set are made for the strap to pull the other way. My variometer looks like it just attaches to the power supply box.
Do you have any pix of the mounting board? It must be a few inches wider than the set by the looks of things It looks like it will just hook into the one end of the mounts and the spring loaded clips will hold on the other end. It'd be nice to get some measurements for the board. There's a NOS 19 set on ebay now.19 set The first pic I've posted is my stuff and the others are the ebay stuff.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 Last edited by cletrac (RIP); 04-04-09 at 03:19.
|
 |
|
|
Hybrid Mode
