MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Carrier Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 28-07-12, 15:05
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default How to spot original front fenders ?

Anyone know how to spot an original front mudguard to a repro ?
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #2  
Old 28-07-12, 15:30
Ron Pier's Avatar
Ron Pier Ron Pier is offline
Registered User
 
Join Date: Apr 2009
Location: Poole. UK
Posts: 1,273
Default

Is this a trick question? It depends how good the repro is! If it is an exact copy in every detail, you could only tell by it's newness Ron
Reply With Quote
  #3  
Old 28-07-12, 15:40
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

Seen a pair near me and they have AE stamped in but I cannot see any part number, the lad is asking decent money for them so want to make sure try are not repop's
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #4  
Old 28-07-12, 17:55
Ron Pier's Avatar
Ron Pier Ron Pier is offline
Registered User
 
Join Date: Apr 2009
Location: Poole. UK
Posts: 1,273
Default

OK Rich. I have no idea if they were stamped with a part No originally (very probably). So you need that confirmed by someone who has wings off there carrier. I also can't think what AE stands for? Ron
Reply With Quote
  #5  
Old 28-07-12, 22:07
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

Ok.... The part number is TL7195 which is stamped on the back edge of the fender between the lamp bolt holes, then between the other holes next to it is the date, they appeared to be pucker afterall so have snaffled them they are 1941 dated so happy days
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #6  
Old 29-07-12, 07:51
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,541
Default Richard

My canadian ones are pressed (rounded) at the outer bend, and the inner plate is welded. some are completely fabicated (all welded edges)
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #7  
Old 29-07-12, 15:11
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

the ones that came with my carrier are as per yours Lynn... the outer edge is rolled and the inner is welded.... which is as per the ones I have just bought... stripped the hundreds of layers of paint off them today, one fender has three strange holes in a triangular pattern, two on the front parallel with the forwardmost edge and the third is centre on the radius part....if that makes any sense.
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #8  
Old 02-08-12, 15:55
George McKenzie George McKenzie is offline
Registered User
 
Join Date: Sep 2006
Location: Northern Alberta CA
Posts: 451
Default front fenders

I have 10 front fenders some good some bad .Most of them have CTL 7195 or CTL 7196 ,some with just TL 7916 all with FM Co 42 One is stamped CTL 14331 which is a back mud guard number ??. two have just FMCo 42 only on them . The FMCo is on the left side and the other numbers are on the right side .they will be under the plate that bolts them to the fender. Even the MK1 10128 carrier has the FMCo 42 front guard
__________________
George is hooked on OD
5 window DT969
8 ton Fruehauf trailer
M2A1Halftrack ,CMP #11 F15A1 #13 F15A1
RAF Fordson Tractor, 42 WLC HD
No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts
MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407
Hull plate # 7250 all have walk plate on back steps
1917 Patent modle amphibious army tank
Reply With Quote
  #9  
Old 02-08-12, 16:47
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

The ones that came with my carrier were FM Co 44's so must have been changed at some stage.... Which is no suprise
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #10  
Old 02-08-12, 19:38
eddy8men eddy8men is offline
AKA Rick Wedlock
 
Join Date: Dec 2009
Location: manchester
Posts: 715
Default

richie
i have the same holes on my left fender, i always assumed it was to mount a div sign or something like that but i never looked into whether that is the reason but i seem to remember seeing a pic with a sign fitted in the same place

rick
__________________
_______________________
1941 mk1 mortar Carrier
1941 Mk1* Carrier
1942 Mk1* Carrier
1943 T16 Carrier
1945 Mk3 Dingo
1941 Mk3 Covenanter
1941 Mk4 Churchill AVRE (now sold)
1944 Mk6 Cromwell (now sold)
1952 Mk3 Centurion
1952 ARV Centurion
1952 ARV Centurion
1953 Mk3 Centurion (breaking)
Reply With Quote
  #11  
Old 02-08-12, 22:57
RichardT10829's Avatar
RichardT10829 RichardT10829 is offline
Richard Harrison
 
Join Date: Nov 2008
Location: Cullercoats Newcastle Upon Tyne United Kingdom
Posts: 3,068
Default

I have been looking at pics and on some early carriers there is the plaque you mention, I presume that is what the holes are for
__________________
is mos redintegro

__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
Reply With Quote
  #12  
Old 03-08-12, 05:01
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,591
Default

Early carriers had the PASS sign placard on them, on the front left fender and I think it was on the rear right but it's hard to remember now. Brian Asbury has these listed under the CMP trucks section, but they also belong on Mk1s.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 00:41.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016