View Single Post
  #61  
Old 30-04-20, 18:08
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,927
Default Evolution

Quote:
Originally Posted by Grant Bowker View Post
Agreed that the page in MB-C doesn't seem to show the markers going through the junction block but that doesn't make much sense to only make it easy to disconnect part of the wiring.


A reliable source shows a photo of an unmolested wiring harness removed from a known original vehicle and clearly shows wires in the main harness of the same (+/- a tiny bit) length to connect headlights and markers, all through the junction blocks. http://canadianmilitarypattern.com/R...arness%203.JPG
Hi

Thanks Grant, I was in the process of digging out the same photo, that is the wiring from my 1945 HUP, I'll now try to find the photo of the 1942 C60S wiring harness.

But I suspect the difference is just evolution of CMPs they did make ongoing production changes in responses to reports back up through the maintenance channels. The logic I see to all the nose lights all coming to the same terminal blocks is it really annoying when you are pulling the nose off a CMP is to find you just ripped out a wire. It takes me 20 minutes to take the nose off Pattern 13 Cab which makes it a lot easier work on the engine. If you had to chase around and find all the connections it would take longer.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote