Charging Switchboard No 1
I picked up some stuff in town to reproduce a switchboard. The panel piece is 12" square and the sides are 3" deep. I guessed that the panel is recessed 3/4" and went from there.
The toggles on the switches are the same size and shape as an ordinary household light switch. The bolts that hold the cover plate to the switch are the same spacing as the top switches on the switchboard. Some hardware strap hinges are the proper size too.
I ordered some nylon shoulder washers and knurled thumb nuts off ebay and am watching for some 25 amp or volt gauges to show up. There's quite a few outfits that made analog gauges that would work.
The terminals for attaching wires are 1/4" NC by the look of it.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
|